BI-50-FLUSHMT-BLKGLS BI-50-FLUSHMT-WHTGLS BI-50 ... - Webflow

INSTALLATION AND OPERATION INSTRUCTIONS FOR WALL- MOUNT AND BUILT- IN UNITS

BI-50-FLUSHMT-BLKGLS BI-50-FLUSHMT-WHTGLS BI-50-FI-FLUSHMT-BLKGLS

operation

09 13-01

TABLE OF CONTENTS

CONGRATULATIONS!

In selecting this Amantii Wall Mount OR Built-in electric fireplace, you have chosen the finest and most dependable fireplace on the market today. A beautiful and functional addition to the finest homes. Welcome to the family of satisfied Amantii electric fireplace owners.

Please read and carefully follow all of the instruction sfound in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will as sure that you have many years of dependable and enjoyable service from your Amantii product.

Important instructions BI-50-FLUSHMT-BLKGLS/WHTGLS (BI-FI-50FLUSHMT-BLKGLS) Installation Overview Package Contents Built-In Installation Wall Mount Installation Media options Fire Glass Media Installation Front Installation Operating the Unit Replacing The Remote Control Battery Care And Maintenance Fireplace Maintenance Trouble Shooting Parts list Service History Warranty Dealer Contact Information

Page 3 Page 4 Page 5 Page 6 Page 7 Page 9 Page 10 Page 11 Page 12 Page 13 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Back Page

2

IMPORTANT INSTRUCTIONS WARNING!

5. Do not use outdoors.

15.

properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.

Grounding Pin

Adapter Grounding Means

Cover Of Grounded Outlet Box

Metal Screws

AB CD

Grounding Pin

Fig. 1

SAVE THESE INSTRUCTIONS

3

BI-50-FLUSHMT-BLKGLS/WHTGLS BI-FI-50-FLUSHMT-BLKGLS

Voltage Amps

HEATER

NO HEATER MOTOR HEATER MOTOR FLAME Appliance Width Appliance Height Appliance Depth Gross Weight

Cord Length

HIGH LOW

Built-In or Wall Mount Appliance 120V AC,60Hz 12A 1500W 1500W 750W 25W 19W 4W 47 1/2" or 120.6 cm 21 1/8" or 53.6 cm 6 1/8" or 15.5 cm 80lbs or 36.35kg Left side 74.81" or 190.00 cm

This appliance has been tested in accordance with the UL Standand 2021 for

appliances in the United States and Canada. If you need assistance during installa-

NOTE: This appliance must be electrically wired and grounded in accordance with local codes. In the absence oflocal codes, us the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA

States.

23 10 21 1/8 1/2

45 1/2 51

47 1/2

4

6 3/4

INSTALLATION OVERVIEW

SITE SELECTION

NOTE: BEFORE YOU INSTALL

wall. Review and consider all of the following condi-

rr

wo (2) wall

t-In (page 7)

W

nt (Page 9)

ethods:

Power supply Wire Gage

Voltage Wire Gage

Fuse

120 v

14 G .

15 MP

re etc.

rapes, pillow

-

dir

ht and away fr overhead light-

ing.

electric et for ease of electric

and all hardware fr ox and r ove all packaging relat aterials prior to installa-

Wall switch / t hermostat Wire Gage

Voltage

Wire Gage

5 Volts

18 Gage

cated cir

Volt cir referr

r red. -

WARNING:

re the power cord is not instialled so that it is pinched or against a sharp edge and ensure that the power cord is stored or red to avoid tripping or snagging

ry to persons.

st c

with local

codes -

ry to persons.

To reduce the risk of fire, do not store or use gasoline or other flammable vapors and liquids in the vicinity of the heater.

PACKAGING LIST

with:

r te control Decorative media (See page 11)

TOOLS & BUILDING SUPPLIES

NORMALLY REQUIRED

T Phillip rewdriver

aw and/

aw

Level

Tape

E

Fr

aterials

Wall Finishing Mar-

terials

aterials

stable)

Pliers re

Gloves

5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download