HOW TO CONFIGURE THE KIOSKS IN PCANYWHERE



HOW TO CONFIGURE THE KIOSKS IN PCANYWHERE

IN ORDER TO WORK WITOUTH A VPN

Before to set up the PCAnywhere is important to have done the first part of the assignation of ports, this part is explained in the manual called HOW TO CONECT TO THE KIOSKS WITHOUT VPN. After this is necessary to follow the next steps:

1. Connect to the VPN corresponding to the site.

2. In the Kiosk open the pcanywhere , go the option Hosts and in the tool bar choose the option Tools and then the submenu Options …

[pic]

3. Choose the tab Host Communications and press the button Advanced TCP/IP Options …

[pic]

After you have choose Advanced TCP/IP Options … in the field Data Port write the port that you configured on the router in the field TCP/IP, and in Status Port write the port that you chose in the router in the option UDP, finally click on the button OK and restart the computer.

4. After the computer had been restarted the VPN can be disconnected and now the configuration needs to be done in the place that the person is going to connect to the kiosk (which means that of you are going to connect to a kiosk this step must be done in your PCAnywhere and not in the PCAnywhere of the kiosk). To start the configuration go to PCAnywhere and in the option Remote create a new remote, go to Settings and write in there the ip of the vpn (NOT THE IP OF THE KIOSK), then go to the tab Connection Info and press the button Details.

[pic]

In the fields Data Port and Status Port write the same ports that you wrote when you made the configuration of the Host in the PCAnywhere of the kiosk, finally press the Button OK and you are ready to connect to a kiosk without use a VPN connection.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download