AR SYLVAN HINGE ARMS
¡¤?
WWW.
AR HINGE
SYLVAN
ARMS
GEN 3 FOLDING STOCK ADAPTER
Parts List:
Tools Required:
? Standard AR Castle Nut Wrench
? Lower Vise Block
Note:
It is not necessary to disassemble
the already assembled parts
during installation.
You can also watch our
installation video by going to:
CAUTIONS AND WARNINGS
ALWAYS CHECK THAT THERE IS NO ROUND IN CHAMBER AND REMOVE THE MAGAZINE CHECK THE CHAMBER AGAIN TO ENSURE WEAPON IS UNLOADED.
SAFETY SHOULD AWAYS BE ENGAGED BEFORE FOLDING AND REMAIN ENGAGED
DURING THE ENTIRE DURATION OF BEING IN THE FOLDED POSITION.
DO NOT FIRE WHILE STOCK IS FOLDED - THIS PRODUCT IS NOT DESIGNED TO BE FIRED
IN THE FOLDED POSITION.
FIREARM MODIFICATIONS SHOULD BE DONE BY A GUNSMITH OR CERTIFIED ARMORER.
Installation Instructions:
Buffer
Retaining
Pin----_.."'
Install the Bolt Extension:
Watch our installation video by going to:
For 9mm:
? It is necessary to remove the pin and weight in order to fit the bolt adapter correctly.
? If your rifle has a smaller diameter hole in the carrier, please contact us.
Tip:
Make sure the latch is fully engaged to ensure maximum rigidity and structural
integrity while in the firing position.
Maintenance
? O-rings should be regularly checked on the bolt extension for wear or
damage. If damage is apparent, replace O-rings.
? Locking latch should be oiled regularly for longevity and ease of use.
Limited Lifetime Warranty
We will repair or replace your Sylvan Arms AR Hinge Folding Stock Adapter, free of
charge, in the event of a defect in materials or craftsmanship obtained during normal use
or handling based on the Sylvan Arms AR Hinge Folding Stock Adapter user's manual.
Shipping, packing, and insurance costs to and from the factory will be your responsibility.
This limited lifetime warranty is available only to the original buyer and proof of purchase
in the form of the original receipt is required.
AR HINGE
GEN 3 FOLDING STOCK ADAPTER
The Sylvan Arms Gen 3 AR Folding Stock Adapter significantly
reduces the length of your rifle by allowing you to fold the stock for ease
of stow and travel. Designed for 5.56/.223 to .308 systems, it is CNCMachined in the USA from 7075 Billet Aluminum, making it uniquely
lightweight and corrosion resistant. This assembly weighs only 6 ounces.
Our adapter only requires a standard armorer's wrench and does not need
to be disassembled to install on your rifle/pistol.
Simply screw on, fold, and carry!
SYLVAN
ARMS
,?
Watch our installation
video by going to:
?
? 1430 Enterprise Ave., Myrtle Beach, SC 29577
? Sales@
Jliil 888.256.5632
@;I
? Copyright 2019 Sylvan Company - All rights reserved.
8
l l l?llll?l ??IUI111 5
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- outdoor security camera instructions fcc id
- please watch the installation video before your setup https
- the pre operative session pre operative instructions for deep quatela
- keep covid 19 out https watch v 7srwrf9mgdw feature
- when preparing and cooking food you should always be accompanied by an
- youtube y — 7t y youtube live https zbqucrfkwg4
- s s spm public school
- council for the indian school certificate examinations
- https gzaeght9lzc ttps qs8ek5chhyi prweb
- ar sylvan hinge arms
Related searches
- sylvan sat prep
- sylvan online tutoring jobs
- sylvan learning center online tutoring
- sylvan remote tutoring
- sylvan learning center job openings
- sylvan online school
- sylvan learning center locations
- sylvan tutoring pay
- sylvan tutoring online
- how much does sylvan pay
- sylvan learning center pay
- sylvan in home tutor