Access Washington Home
State of Washington
Department of Enterprise Services
Master Contracts & Consulting (MCC)
[pic]
Contract #08409 Imaging System, Portable
(HOMELAND SECURITY)
For Purchases of Materials, Supplies, Services, and Equipment
Under the Authority of
Chapter 43.19 RCW
Specifications
Awarded Contractor: Quality Discount Supplies & Services
MCC Contact Information
|Contracts Specialist: |Heidi Bohl, CPPB |
|Phone Number: |(360) 407-9421 |
|Fax Number: |(360) 586-2426 |
|Email: |Heidi.Bohl@des. |
SPECIFICATIONS
|Description |Check if as |
| |specified |
|Logos EPIX Digital Imaging System, portable with re-usable imaging plates. |
|System to include: Scanner, imaging software, base notebook computer with cables, two 8”x10” image plates with holders and 8”x10” carousel, two 8”x17” |
|image plates with holders and 8”x17” carousel, and C.H. Ellis carrying case |
|Scanner: |X |
|Height: 15.5 in, 39.4 cm | |
|Width: 19.4 in, 49.3 cm | |
|Depth: 10.8 in, 27.4 cm | |
|Weight: 32 lbs, 15 kg | |
|Interface Cable: USB 2.0 Cable | |
|Voltage: 110-240 V AC | |
|Frequency: 50/60 Hz | |
|Power: 110 watts max. | |
|Laser Classification: Compliance per DHHS Radiation performance Standards 21 CFR, Ch I, Subch. J+EN60825 Class I Laser Device | |
|Imaging Plates: |X |
|Dimensions: 8 in x 10 in, 20 x 25 cm | |
|8 in x 17 in, 20 x 43 cm | |
|Resolution: 150 dpi, 170 micron square pixels, approximately 2 lp/mm | |
|300 dpi, 85 micron square pixels, approximately 4 lp/mm | |
|Storage: Clear plastic shipping envelope | |
SPECIFICATIONS continued
|Description |Check if as |
| |specified |
|Imaging Application Software: |X |
|The Imaging Software Application is a Incident Management system used in conjunction with Logos imaging devices to create and | |
|maintain incidents. Incidents consist of event specific information (technicians name, incident location and address, and note | |
|field) along with a series of scanned x-ray images and/or digital photos. In addition to incident management capabilities, the | |
|application also functions as an x-ray image enhancer with image processing filters and annotation capabilities. | |
| | |
|Image Editor Functions: | |
| | |
|AutoCorrect | |
|Emboss | |
|Invert | |
|Rotate 90 Degrees Left | |
| | |
|Auto Contrast | |
|Equalize | |
|Line | |
|Rotate 90 Degrees Right | |
| | |
|Auto Leveling | |
|Gamma | |
|Magnify | |
|Rotate 180 Degrees | |
| | |
|Crop | |
|Histogram | |
|Mirror | |
|Region of Interest | |
| | |
|Flip | |
|Image Stitching | |
|Measure | |
|Sharpen | |
| | |
|Brightness | |
|Image Renaming | |
|Measure Angle | |
|Smooth | |
| | |
|Colorize | |
|Image Import | |
|Measure Area | |
|Text | |
| | |
|Contrast | |
|Image Export | |
|Outline | |
|Zoom to Area | |
| | |
| |
|Logos Phosphor Imaging Plate. |X |
|8 in x 10 in, re-usable for approx. two thousand applications, refer to item one specifications. | |
|Logos Phosphor Imaging Plate. |X |
|8 in x 17 in, re-usable for approx. two thousand applications, refer to item one specifications. | |
SPECIFICATIONS continued
|Description |Check if as |
| |specified |
|X-Ray Source System, Golden Engineering XR-200 |
|The XR200 is a 150kV, single-package, pulsed X-ray source is used for radiographic examination of various items. The option of use with conventional |
|radiographic film, instant radiographic film, or digital inspection systems provides users with the flexibility to develop a complete radiographic system|
|best suited to their individual needs. The combination of battery power and minimal weight allows the user to obtain radiographs in even the most remote |
|location. |
|Size (Including battery pack) 12.5 in. x 4.5 in. x 7.5 in. |X |
|(31.75 cm x 11.5 cm x 19 cm) | |
|Weight (Including battery pack) 12 lbs. ( 5.5 Kg ) | |
|Output dose. 3.1 mR/pulse +/- 0.5 mR measured 12 inches from source | |
|Pulse rate 25 pulse per second nominal | |
|X-ray source size 1/8 in. (3 mm) | |
|Maximum photon energy 150 KVP | |
|X-ray pulse width 60 nanoseconds | |
|Current draw 35 amps @ 13.4 volts | |
|Power supply DeWalt® 14.4 volt, removable, rechargeable, nickel-cadmium battery | |
|Battery recharge time 1 hour with standard DeWalt® charger, 15 minute charger available | |
|Number of pulses per battery charge 4000 | |
|Temperature range -10 to 120 degrees F (-23 to 50 degrees C) | |
|Maximum duty cycle 200 pulses every 4 minutes (3000 pulses per hour) | |
|Warm-up None required | |
|X-ray leakage 3 mR per 100 pulses measured 2 inches behind the unit | |
|Warranty 1 year limited warranty | |
SPECIFICATIONS continued
|Description |Check if as |
| |specified |
|Bogen Tripod, Golden Engineering 3035 |
|The 3035 geared center post features an automatic safety lock with push button release and maintains its stability at all heights. Stability is enhanced |
|by independent variable-spread leg braces. The three legs are continuously adjustable in relation to each other. The tripod has a maximum extension of 81|
|1/4", and can go as low as 16 1/2". PN 4053035. |
|Extended Height: 81 ¼ in |X |
|Folded Length: 33 in | |
|Number of Leg Sections: 3 | |
|Center Post Travel: 9 ¼ in | |
|Weight: 9 lbs 14 oz | |
|Head: 3-D Bogen 3047 Deluxe 3-Way | |
|X-Ray Source Compatibility: XR150, XR200, XRS-3, Inspector 200 | |
| |
|Bogen Tripod Bag, Golden Engineering 3281 |
|Heavy-duty Cordura nylon bags with shoulder straps for item 5, tripod 3035. |X |
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.