Laboratory Safety for Chemistry Students - Home
Chapter 5 Questions5.1.1 Corrosives in Introductory Chemistry1.Corrosives are chemicals thata)have a pH > 14 or < 0.b)are acids or bases.c)cause harm or injury by damaging tissue at the point of contact.d)are rarely encountered in introductory chemistry classes.2.Corrosives can beLiquidsSolidsGasesSolutionsa)only I and IVb)only I, II and IIIc)only I and IId)I, II, III and IV3.The potential for injury from an acid depends uponThe chemical structure of the acid.The concentration of the acid in solution.The area of exposure (such as skin vs. eyes).The duration of the exposure.The temperature of the solution.a)I, II and IVb)II, III, and IVc)I, II, III, and IVd)I, II, III, IV and V.4.The three corrosive acids most likely to encountered in introductory chemistry courses areAcetic acidSulfuric acidHydrochloric acidNitric acid.a)I, II and IIIb)I, III and IVc)II, III and IVd)I, II and IV5.Which acid is also a strong oxidizing agent?a)nitric acidb)sulfuric acidc)hydrochloric acidd)all of the above.6.At what concentration are acids and bases generally considered to be corrosive?a)greater than 0.1 Mb)greater than 1 Mc)greater than 3 Md)greater than 6 M7.What is the correct procedure for preparing the dilution of a solution of an acid?a)Add the acid to the water as quickly as possible.b)Add the acid to the water slowly with stirring.c)Add the water to the acid as quickly as possible.d)Add the water to the acid slowly with stirring.8.Which base is not likely to be used in an introductory chemistry course?a)NaOHb)KOHc)NH4OHd)LiOH9.Which base, at high concentration, will also have a corrosive gas associated with it?a)NaOHb)KOHc)NH4OHd)LiOH10.Which statement is true?a)Corrosive bases generally more dangerous than corrosive acids because corrosive acids damage tissue in a fashion whereby a somewhat protective layer is formed that prevents further damage.b)Corrosive acids generally more dangerous than corrosive acids because corrosive bases damage tissue in a fashion whereby a somewhat protective layer is formed that prevents further damage.c)Corrosive bases generally more dangerous than corrosive acids because the body is better able to neutralize corrosive acids.d)Corrosive acids generally more dangerous than corrosive acids because the body is better able to neutralize corrosive bases.11.Corrosive gases are not used much directly introductory chemistry experiments, buta)they are sometime encountered when using solutions of nitric acid or ammonia.b)they are sometimes produced as a by-product of many common reactions.c)they can be produced when chemicals are inadvertently mixed.d)even when used they present little hazard since it is common to wear respirators when using them.12.What are the three most likely oxidizing agents to be used in an introductory chemistry experiment?Nitric acidHydrogen peroxidePotassium permanganate.Chlorine.a)I, II and IIIb)I, II and IVc)I, III and IVd)II, III and IV.13.What is the best strategy to avoid contact with corrosive chemicals?a)Wear chemical splash goggles.b)Wear appropriate gloves.c)Wear chemical splash goggles and appropriate gloves.d)Always work in a chemical hood.5.1.2 Flammables – Chemicals with Burning Passion1.Flammable chemicals are most commonly found in which category of chemicals? a)organic solutesb)organic solventsc)inorganic solutesd)inorganic solvents2.Which statement is true?a)Flammable chemicals and combustible chemicals have similar boiling points but different flash points.b)Flammable chemicals and combustible chemicals have similar flash points but different boiling points.c)Combustible chemicals burn more easily than flammable chemicals.d)Flammable chemicals burn more easily than combustible chemicals.3.The most flammable chemicals are identified bya)“HC 1” in the GHS and “4” in the NFPA rating systems.b)“HC 1” in the GHS and “0” in the NFPA rating systems.c)“HC 4” in the GHS and “4” in the NFPA rating systems.d)“HC 4” in the GHS and “0” in the NFPA rating systems.4.What are the three components of the Fire Triangle?A fuelA source of ignitionAn oxidizing agent.A chain reaction.a)I, II and IIIb)I, II and IVc)I, III and IVd)II, III and IV5.What is the most common oxidizing agent for fires?a)Chlorine.b)Nitric acid.c)Elemental oxygen.d)Methane.6.As a general rule, organic solvents area)lighter than air and not flammable.b)heavier than air and not flammable.c)lighter than air and flammable.d)heavier than air and flammable.7.Which statement is true regarding the state of a chemical as is it burning?a)Only liquids and gases can burn.b)Only liquids can burn.c)Only gases can burn.d)Solids, liquids and gases can burn.8.Which statement is true?a)Flammable substances have a higher activation energy than combustible substances and both substances react exothermically. b)Flammable substances have a lower activation energy than combustible substances and both substances react exothermically.c)Flammable substances have a higher activation energy than combustible substances and both substances react endothermically.d)Flammable substances have a lower activation energy than combustible substances and both substances react endothermically.9.Autoignition temperatures for most organic solvents area)fairly large.b)the temperature at which a flammable chemical ignite spontaneously in air.c)the temperature at which the solvent burns in an automobile.d)A and B.10.Which set of values best characterizes a flammable liquid?a)Low BP, high vapor pressure, low flash point.b)Low BP, high vapor pressure, high flash point.c)Low BP, low vapor pressure, low flash point.d)High BP, low vapor pressure, low flash point.11.Which is true?a)The LEL is lower than the UEL.b)The UEL is lower than the LEL.c)The UEL and LEL are often the same value.d)The LEL and LFL are different numbers.12.Which chemical is the most dangerous in the lab with regard to potential fire hazard?a)dichloromethaneb)ethanolc)diethyl etherd)toluene13.Which chemical is the least dangerous in the lab with regard to potential fire hazard?a)acetoneb)ethanolc)dichloromethaned)butanol14.Using the GHS criteria, gasoline is categorized asa)extremely flammable.b)highly flammable.c)flammable.d)combustible.5.2.1 Corrosives in Advanced Labs1.Corrosive chemicals usually involve what kind of reaction(s)?a)Acid-base.b)Redox.c)Acid base plus redox.d)Acid base and/or redox.2.For some oxidizing acids, like nitric acid, the corrosive power of the chemical increases as concentration increases becausethere is more oxidizing agent availablethe oxidizing agent is pH-dependent and lower pH increase the oxidation half-cell potentialthe oxidizing agent is pH-dependent and higher pH increase the oxidation half-cell potentiala)only Ib)I and IIc)I and IIId)only II3.Aqua regia is a mixture of a)HCl and H2SO4b)HNO3 and H2SO4c)HNO3 and HNO2d)HCl and HNO34.Aqua regia can dissolve precious (“unreactive”) metals such as Pt and Au sincea)it has a high concentration of a strong oxidizing agent.b)the oxidizing half-cell potential is very high due to the very acid nature of the solutionc)it has complexing anions present.d)All of the above.5.NaOH destroys living tissue quite well since it reacts readily witha)proteins.b)esters.c)acids.d)proteins and esters.6.Acetic acid can be corrosivea)at high concentrations when inhaled.b)since it is a good dehydrating agent.c)since it causes burns when exothermically reaction with water in tissue.d)All of the above.7.Phosphoric acid a)is corrosive since it has an unusually large Ka.b)is corrosive since it has an unusually small Ka.c)can cause pulmonary edema.d)is usually found as a solid.8.HF is corrosive at concentrations that area)≥ 0.01 Mb)≥ 0.1 Mc)≥ 1 Md)≥ 10 M9.HF should only be useda)if there has been special training on using this chemical.b)if medical treatments for HF exposures are immediately available.c)if a response plan for HF exposure is in place.d)All of the above.10.Which halogen is relatively safe to handle in elemental form?a)Cl2.b)Br2.c)I2.d)None of the above.11.Reducing agent such as active metals and some metal hyridesa)are not corrosive since they are reducing, not oxidizing, agents.b)are unreactive except in the present of moderately strong oxidizing agents.c)often produce hydroxide and flammable H2.d)generally do not react with water.12.Water-reactive, de-hydrating agents a)are often solids.b)should be flushed immediately with large amounts of water upon exposure.c)should be scraped away before flushing with water.d)A and C.13.Phenol isa)used as a commercial throat spray at 1% concentration.b)a solid compound that reacts quickly upon contact with skin.c)is also called carbolic acid.d)All of the above.5.2.2 The Chemistry of Fire and Explosions1.In combustion reactionsa)the fuel is reduced and the oxygen is oxidized.b)the fuel and the oxygen are both oxidized.c)the fuel and the oxygen are both reduced.d)the fuel is oxidized and the oxygen is reduced.2.Incomplete combustion arises froma)the absence of enough fuel and produces carbon dioxide in a reduced state.b)the absence of enough oxygen and produces carbon dioxide in a reduced state.c)the absence of enough fuel and produces carbon monoxide.d)the absence of enough oxygen and produces carbon monoxide.3.With regard to sustainging life, the three main dangerous results of a fire arethe heat releasedtoxic by-productsreduced fuel reduce oxygen levelsa)I, II and IIIb)I, II and IVc)I, III and IVd)II, III, and IV4.The leading cause of death in fire is due toa)lack of oxygen.b)heat.c)inhalation of smoke.d)None of the above.5.At what oxygen level do humans start to shown reduced physiological characteristics?a)12.5%b)14.0 %c)16.0 %d)19.0%6.A backdraft explosion can occur whena)there is a lack of fuel in a partially-burned room.b)there is a lack of oxygen in a partially-burned room.c)a door is opened into a room instead of opening into a hallway or outside.d)a fire is very smoky.7.The odorant in natural gas is usually a)an amine.b)a phosphorus compound.c)a mercaptan.d)an ester.8.An explosion can occur whena)the rate of energy released in a chemical reaction is faster than the ability of the area to dissipate the energy through convection and heat capacity.b)the rate of energy released in a chemical reaction is slower than the ability of the area to dissipate the energy through convection and heat capacity.c)the energy released in a chemical reaction is almost exactly equal to the ability of the area to dissipate the energy through convection and heat capacity.d)any of the above.9.A BLEVE is an explosion wherea)a container of flammable liquid has ruptured in the presence of an ignition source.b)the flammable liquid in a container can no longer absorb enough heat to keep the container cool enough not to rupture.c)a container has reached in internal pressure will above the pressure relief valve value.d)All of the above.10. A BLEVE is not a likely lab event sincea)relief valves on compressed gasses in lab will always prevent a BLEVE.b)special additives are present in high-pressure lab tanks that inhibit explosions.c)it requires that there be an active fire impinging upon a sealed vessel containing a flammable liquid.d)vessels used in lab environments are constructed so that they cannot explode.5.2.3 Incompatibles – A Clash of Violent Proportions1.What class of chemicals is incompatible with: azides, cyanides, hydrides, perchlorates and sulfides?a)acidsb)basesc)oxidizing agentsd)reducing agents2.What class of chemicals is incompatible with: anhydrides, organic nitro compounds, and acids?a)acidsb)basesc)oxidizing agentsd)reducing agents3.What class of chemicals is incompatible with: organic compounds and hydrides? (RH changed to air)a)acidsb)basesc)pyrophoricsd)reducing agents4.What class of chemicals is incompatible with: chromates, peroxides and permanganates?a)acidsb)basesc)oxidizing agentsd)reducing agents5.What class of chemicals is incompatible with: hydrides, carbides and alkali metals?a)pyrophoricsb)reducing agentsc)basesd)water-reactives Rh chagnd to “water or aqueous solutions”6.Mixing a concentrated strong acid with a concentrated strong base is dangerous becausea)the reaction between H+ and OH- is very exothermic.b)acid-base reactions are always dangerous.c)when using concentrated solutions, the relative amount water available to absorb heat is small.d)A and C7.Chemicals with large, positive reduction potentials will be strong oxidizing agentsstrong reducing agents.easily oxidized.easily reduced.a)I and IIIb)II and IIIc)I and IVd)II and IV8.Chemicals with large, negative reduction potentials will bestrong oxidizing agentsstrong reducing agents.easily oxidized.easily reduced.a)I and IIIb)II and IIIc)I and IVd)II and IV9.What is the most common oxidizing agent used in chemistry laboratory experiments?a)Cl2b)HClO4c)H2O2d)HNO310.Why are perchlorate salts unusually hazardous?a)They are toxic and volatile.b)Some are shock-sensitive.c)They are strong bases.d)They are water-reactive.11.Which is not a good reducing agent?a)Nab)NaHc)Aud)H212.When nitric acid is mixed with acetic acid, the acetic acid behaves asa)an acid.b)a base.c)an oxidizing agent.d)a reducing agent.13.Which class of chemicals is water-reactive?a)Alkali metalsb)Acid anhydridesc)Non-metal oxides.d)All of the above.14.Which is not pyrophoric?a)Silane, SiH4.b)Methane, CH4.c)Borane, B2H6.d)P4.5.3.1 Gas Cylinders – High Pressure Laboratory Hazards1.Which three types of gas-containing cylinders are most common?Small lecture bottles.Tanks about 5 feet tall and 9 inches in diameter.Tanks about 4 feet tall and 18 inches in diameter.Large tanks that store liquid nitrogen or helium.A. I, II, and IIIB. I, II, and IVC. I, III and IVD. II, III, and IV2.What is the most common pressure found in “full” tanks of compressed gas?A. 1200 psi.B. 1800 psi.C. 2200 psiD. 3000 psi.3.What device is designed to prevent a gas cylinder from over-pressurizing?A. the regulator B. the cylinder capC. the relief valveD. the cylinder valve4.What is the most vulnerable part of a gas cylinder without a regulator attached?A. the cylinder capB. the relief valveC. the valveD. the body of the cylinder5.“Inert gases” such as nitrogen or helium pose a health hazard becauseA. once inside the body they are not inert.B. they can displace enough oxygen from air to make the air unsafe.C. because they react with oxygen in the air.D. because they are very cold.6.There are regulations that limit the number ofA. gas cylinders allowed in a lab, depending upon the size of the lab.B. total cubic feet of compressed gases in a lab.C. cylinders that can have open valves at any single point in time.D. the number of oxygen and flammable gas cylinders in a lab.7.Using personal protective equipment is A. less important when using gases since they cannot splash.B. less important when using gases since gases are usually unreactive.C. more important because gas cylinder explosions are fairly common.D. equally important as when working with other chemicals in labs.8.Using liquid He, Ar, or N2 poses a health hazard due to theirA. potential for asphyxiation.B. cryogenic properties.C. reactivity.D. A and B.9.The advantage of a two-stage regulator over a one-stage regulator is that itA. is less expensive.B. allows for a more constant flow rate of the gas.C. less likely to malfunction.D. has an emergency shut-off feature.10.Gas cylinder and gas regulators areA. interchangeable.B. each designed to work with particular gasesC. have the same threads.D. usually made from the same metal or allow.11.Brass is used in many regulators since it is A. very unreactive with almost all gases.B. designed to fail before the cylinder explodes.C. soft enough to allow for good seals.D. the cheapest metal alloy.12.When connecting the regulator to the cylinder it is best toA. use Teflon tape.B. a non-reactive grease.C. a drop of water.D. none of the above.13.What is the correct order in getting a gas into a system once the cylinder cap is removed?Open the main valveOpen and adjust the regulator valveAttach the regulatorOpen the outlet valve A.I, III, II, IVB.IV, III, I, IIC.III, II, I, IVD.III, I, II, IV14. When removing a “resistant” cylinder capA. never use any tool other than your hands.B. use a long tool that fits all the way through the cap to get the best leverage.C. use a tool that does in get inserted inside the cap to apply leverage.D. use a hammer.15.Gas cylinder should be secured whenThe valve is openThe tank is in an occupied lab.The tank is in storage.The tank is empty.A. I and IIB. I, II and IIIC. II, III and IVD. I, II, III and IV16.Gas cylinders should be storedA. in areas when incompatible gases can be separated from each other.B. in areas the are protected from the element, if outside.C. in areas with good ventilation. D. All of the above.5.3.2 Peroxides – Potential Explosive Hazards1.It is safe to work with a particular peroxide-forming solvent as long as youA) have a general understanding of how peroxides form.B) understand the general conditions under which peroxides can be hazardous.C) avoid heating the solvent.D) read in detail about the particular peroxide-forming capability of the solvent you are using.ANSWER: D2.Which category of compounds have associated with them the dangers of peroxides?A) organic peroxidesB) hydroperoxidesC) some inorganic and organometallic peroxidesD) All of the above.ANSWER: D3.What action might cause a peroxide-containing solvent to react violently?A) heatB) shockC) frictionD) All of the above.ANSWER: D4.What chemical feature of peroxides makes them unusually reactive?A) The very weak carbon-oxygen bondB) The relatively strong oxygen-oxygen bondC) Upon dissociation, radicals are formed.D) two adjacent atoms, both with lone pair electrons.ANSWER: C5.Approximately how many categories of chemicals are “peroxide formers?”A) 3B) 8C) 12 D) 23ANSWER: D 6.The chemicals that are “severe peroxide hazards” should be discarded how many months after opening?A) 3B) 6C) 12D) 24ANSWER: A7.Which method is not a desirable strategy for avoiding peroxides?A) Using inhibitors.B) Using alternate, non-peroxide-forming solvents.C) Avoiding using solvents that contain any oxygen atoms.D) Limiting use and storage.ANSWER: 8.What information should be included on a label for a peroxide-forming chemical?A) Date received, date opened.B) Date received, date to discard.C) Date opened, date to discard.D) Date received, date opened, date to discard.ANSWER: D9.As a student, if you encounter an old container of a peroxide-forming chemical, you shouldA) notify a more experienced chemist about the container after moving it to a safe location.B) notify a more experienced chemist about the container without touching or moving it.C) test it immediately.D) have it tested only if there is visible evidence of peroxides.ANSWER: B10.When distilling a peroxide-forming solvent, you shouldA) periodically test the distillate for peroxides.B) perform a low-pressure distillation with no heat.C) never distill the solvent pot to dryness.D) distill to dryness only if you are certain an inhibitor is present.ANSWER: 5.3.3 Reactive and Unstable Laboratory Chemicals1.Why do chemists sometime use chemicals that are inherently unstable or unusually reactive?A) These are generally inexpensive chemicals.B) Their reactivity usually guarantees very little waste generated that needs to be disposed of.C) It is the very reactivity of the chemical that performs the necessary reaction.D) These chemicals react at low temperatures, requiring little or no heat, which saves energy.ANSWER: C2.An explosion is characterized by a reaction thatA) generates energy faster than it can be absorbed by the surrounding environment.B) often generates large amounts of heat and gases.C) may generate a hypersonic blast.D) All of the above.ANSWER: D3.In an explosion, the gases generates volumes of gases how many times greater than the volume of reactants?A) 10-100 times.B) 100-1,000 timesC) 1,000-10,000 timesD) 10,000-100,000 timesANSWER: C4.About how many classes of compounds are considered to have explosive potential?A) 3B) 7C) 12D) 17ANSWER: D5.What book resource is considered the most useful reference when researching the reactivity of chemicals?A) Laboratory Safety for Chemistry Students.B) Prudent Practices in the Laboratory.C) Bretherick’s Handbook of Reactive Chemical HazardsD) U.S. Department of Energy, DOE Explosives Safety ManualANSWER: C6.Explosive compounds generally haveA) weak bonds and generate products that have strong bonds.B) strong bonds and generate products that have weak bonds.C) weak bonds and generate products that have even weaker bonds.D) strong bonds and generate products that have even stronger bonds.ANSWER: A7.Many explosive compounds are molecules that haveA) both an oxidizing and reducing groups. B) both an acidic functional group and a basic functional group.C) both oxidizing and acidic functional groups.D) both reducing and basic functional groups.ANSWER: A8.Polymer-forming compounds are considered hazardous becauseA) the polymerization process is usually free-radical generated.B) the polymerization process can involved thousands of molecules.C) the heat that is generated often cannot be dissipated quickly, which accelerates the reaction.D) All of the above.ANSWER: D9.What compound is usually stored in solution, but becomes explosively dangerous when forming dry crystals?A) diazomethaneB) sodium azideC) picric acidD) nitric acid.ANSWER: C10.What circumstances are important to control to minimize the chance of explosions or out-of-control reactions?A) Keep concentration lows and control the rate of rise of temperature.B) Avoid the use of strong acids if weak acids can be substituted.C) Avoid using catalysts, unless absolutely necessary.D) Make sure that the reaction is adiabatic.ANSWER: A5.3.4 Hazards from Low or High Pressure Systems1.Why is glass used in many high- or low-pressure reaction systems?A) It is relatively inexpensive.B) It is relatively inert.C) It is easy to work with.D) All of the above.ANSWER: D2.What is a disadvantage of using glass in high- or low-pressure systems.A) Many gases tend to discolor the glass.B) It is very hard to adequately evacuate glass systems due to leaks at ground glass joints.C) The integrity of the glass can fail due to scratches, stress fractures and accidental bumping.D) Glass often fractures unexpectedly when immersed in liquid nitrogen.ANSWER: C3.Using a sealed glass tube requiresA) that the correct kind of glass be selected.B) careful sealing of the glass to avoid failure under pressure.C) the use of relatively thick-walled glass.D) All of the above.ANSWER: 4.After a sealed-tube, high-temperature reaction has been run, the glass must be A) broken with a hammer.B) immersed in liquid nitrogen and them allowed to crack due to thermal shockC) etched and broken in a chemical hood using adequate protective equipment.D) cooled very slowly.ANSWER: C5.An alternative to a sealed glass reactor is usingA) standard taper glassware with plugs that are secured with wires.B) standard taper glassware with plugs that are secured with rubber bands.C) standard taper glassware with a rubber septum that provides a safety valve for high pressures.D) glass reactors with screw-in Teflon ? plugs and O-rings.ANSWER: D6.Hydrogenation reactions done in academic labs are typically done onw aht scale of alkene or alkyne?A) ngB) mgC) gD) kgANSWER: C7.What safety equipment is commonly used with a hydrogenation apparatus?A) safety shieldB) chemical hoodC) metal shieldsD) A and B.ANSWER: D8.Vaccum lines systems A) can implode, but this is far less dangerous that an explosion.B) can implode, but attached pump usually prevent any chemicals from escaping.C) can implode, which can send glass and chemicals flying in all directions in a lab.D) cannot implode.ANSWER: C9.When using vaccum systems, it is common to use trapsA) since they limit the size of any implosion.B) since they should prevent the release of any toxic materials into the lab atmosphere.C) to prevent air from entering the pump.D) act as a ballast for the volume of the enclosed system.ANSWER: B10.Vacuum pumps sometimesA) have unguarded pulleys that present a “moving part” hazard.B) are vented into the lab atmosphere.C) are placed on floors and present a trip hazard.D) All of the above.ANSWER: 5.3.5 Electrical Hazards1.The purpose of the “ground wire” in an electric circuit isA) to provide for the flow of electrons to the negative terminal of a battery.B) to take the place of a circuit breaker in electronic configurations where breakers cannot be used.C) to provide for the safe flow of electrons to a grounded line if live wire touch part of an instrument or device that is not supposed to be energized.D) All of the above.ANSWER: C2.What value is enough current to cause tingling at the exposed site?A) 1 milliampsB) 10 milliampsC) 100 milliampsD) 1,000 milliampsANSWER: A 3.The smallest fuses and circuit breakers are typicallyA) 15 milliampsB) 150 milliampsC) 1,500 milliampsD) 15,000 milliampsANSWER: D4.What current is high enough to cause death in some instances?A) 1 milliampsB) 10 milliampsC) 100 milliampsD) 1,000 milliampsANSWER: C5.Circuit breakers and fuses are designed to A) protect humans from mild shocks.B) protect humans from severe shocks.C) protect humans from fatal shocks.D) protect circuits and equipment from overheatingANSWER: D6.Ground fault circuit interrupters are designed to A) act as a “back-up” system if a fuse fails.B) activate if a current to ground is detected.C) are not located near water sources since they would activate prematurely in many situations.D) activate in electrical system that do not have fuses or circuit breakers.ANSWER: B7.What condition can cause a scientist to become part of an electric circuit?A) Improper wiring.B) Improper grounding.C) Exposed electrical wires.D) All of the above.ANSWER: D8.What kind of lab equipment might have exposed circuits?A) Electrophoresis units.B) Lasers.C) Electrolysis units.D) All of the above.ANSWER: D9.Safety devices such as interlocks should A) electrical circuits cannot have GFCIs or fuses.B) never be overridden.C) be used most of the time, except when very high voltages are involved.D) be used only when using devices near sinks and other water sources.ANSWER: B10.If someone is in contact with an energized electrical circuit, it is best toA) immediately grab the wire that is causing the exposure.B) immediately grab the person to remove them from the exposure.C) call 911 before doing anything.D) turn off all power to the circuit before touching the person.ANSWER: D5.3.6 Housekeeping in the Research Lab – The Dangers of Messy Labs1.What factors contribute to “messy labs” academic environments?A) Many of the occupants are students with limited training in safety.B) Faculty mentors offer varying degree of supervision in labs.C) “Productivity” can sometimes override “safety and cleanliness.”D) All of the above.ANSWER: D2.Why is “messy” not automatically “dangerous”?A) Because most labs are, in fact, somewhat messy yet perfectly safe.B) Because it is not practical to keep labs clean.C) Because a “working lab” is likely to have experiments in preparation, in progress, or in a clean-up stage that doesn’t necessarily present significant hazards.D) Because some “clean” labs are dangerous, too.ANSWER: C3.Which situation is not dangerous?A) A bottle of strong base placed on the floor.B) An unlabeled beaker of a clear liquid.C) A spill that is contained inside of a chemical hood.D) None of the above.ANSWER: D4.Using a chemical hood for storage space is acceptable whenA) the chemicals being stored are non-volatile.B) there is no other safe place to store chemicals.C) no more than one-half of the surface area is occupied.D) None of the above.ANSWER: D5.Which has been associated with “orderliness” in the work environment?A) Fewer “lost work” days.B) Fewer injuries.C) Improved morale.D) All of the above.ANSWER: D6.When is it appropriate to store boxes of chemicals on the floor in a laboratory?A) When they are too heavy to lift by only one person.B) When they will be stored there for no more than 24 hours. C) When a sign is posted just above the location indicating the contents of boxes.D) Never.ANSWER: D 5.3.7Non-Ionizing Radiation and Electric and Magnetic Fields1.Which part of the electromagnetic spectrum is not considered to be non-ionizing radiation?A) microwavesB) short wave radiofrequenciesC) x-raysD) radarANSWER: C2.The 60 Hz frequency associated with standard electrical current is categorized as what band of radiation?A) ELFB) VLFC) Short waveD) None of the above.ANSWER: A3.What instrument used in chemistry laboratories uses RF radiation?A) EPRB) Microwave spectrometerC) NMRD) LasersANSWER: C 4.Which devices emits potentially dangerous levels of UV light?A) Light boxes for TLC.B) Transilluminators.C) UV lamps for use in chemical reactions in quartz flasks.D) All of the above.ANSWER: D5.Damage to the cornea occurs mostly from which band of UV light?A) AB) BC) CD) None of the above.ANSWER: C6.Generally speaking, static magnetic fields A) have biological effects only at field strengths greater than 1 G.B) have biological effects only at field strengths greater than 1 1000 G.C) have biological effects only at field strengths greater than 1 T.D) have no biological effects.ANSWER: D5.3.8 An Array of Rays: Ionizing Radiation Hazards in the Lab1.Which feature of an alpha particle can vary and, in doing so, affect the hazard level of the radiation?A) massB) chargeC) velocityD) None of the above.ANSWER: C2.Alpha radiation is generally considered not to be hazardous since theyA) decay almost immediately after being emitted from a nucleus.B) have very low penetrating power.C) are absorbed in the air.D) have such low velocitiesANSWER: B3.Which is true?A) Alpha decays usually also produce beta emissions.B) Beta decays usually also produce alpha emissions.C) Alpha and beta decays usually also produce gamma emissions.D) All of the above.ANSWER: C4.X-ray radiation from diffraction and fluorescence instruments isA) not very dangerous because the x-rays are absorbed in the air.B) very dangerous but pose little real hazard since instruments are designed to completely enclose all beams.C) very dangerous and users must not override devices designed to protect from exposures.D) dangerous only when at “full power.”ANSWER: C5.For radiation, stochastic effect are those where A) the probability of the effect is related to the dose but the degree of the effect is not related to the dose.B) the probability of the effect and the degree of the effect is related to the dose.C) the probability of the effect is not related to the dose but the degree of the effect is related to the dose.D) neither the probability of the effect nor the degree is related to the dose.ANSWER: A6.What is the order of penetrating ability?A) alpha > beta > gammaB) beta > alpha > gammaC) gamma >alpha > betaD) gamma > beta > alphaANSWER: D7.Regulatory agencies use which dose-effect model and recommend what maximum exposure level?A) linear, ALARAB) non-linear, ALARAC) linear, zeroD) non-linear, zeroANSWER: A8.What is the average radiation dose received per year by U.S. citizens?A) 20 mremsB) 360 mremsC) 20 remsD) 360 remsANSWER: B9.A dental x-ray typically involves what dose of radiation?A) 0.5 mremB) 5 mremC) 360 mremD) 5 remANSWER: B10.What shielding material is best for x-ray and gamma radiation?A) None is needed since these radiations are absorbed by air.B) Plastic.C) Lead.D) No shielding is effective.ANSWER: C5.3.9 Cryogenic Hazards – A Chilling Experience1.Which substance is not a commonly-used cryogen?A) H2O(s)B) CO2(s)C) He(l)D) N2(l)ANSWER: A2.Exposure of the skin to a cryogen A) poses little risk since the skin quickly vaporizes the cryogen.B) usually leads to dead skin that heals with surprising quickness.C) causes frostbite.D) freezes blood below the skin which causes a temperature drop throughout the body.ANSWER: mon cryogens pose an explosion hazard sinceA) they are very flammable.B) if they vaporize or sublime in a constant-volume container a very high pressure can be rapidly produced.C) they are usually stored in sealed containers.D) when in contact with glass, the glass usually shatters.ANSWER: B4.Cryogens can cause asphyxiation whenA) they are consumed in the liquid state.B) rapid vaporization displaces oxygen from the atmosphere.C) they cool down the air in a room enough to freeze the lungs upon inhalation.D) they become colorless as gases.ANSWER: B5.Containers designed to hold cryogens are calledA) cryogenites.B) high-vacuum flasks.C) double-reflective beakers.D) Dewar flasks.ANSWER: D6.Dewar flasks are often wrapped with tape in order toA) protect user’s hands from the cold temperature.B) provide a better grip.C) minimize flying glass in the event of an implosion.D) provide more insulation to help keep the cryogen cold.ANSWER: C7.Dewar flasks should be A) sealed tightly when holding a cryogen to minimize cryogen loss.B) sealed tightly when holding a cryogen to minimize the danger of asphyxiation.C) covered loosely to keep out contaminants or prevents spillage during transport.D) covered loosely to minimize the danger of asphyxiation.ANSWER: C8.When transferring a liquid cryogen from one container to anotherA) the systems should be connected to each other but sealed from the atmosphere.B) a phase separator should be used.C) the process should be done in a small, unventilated room to prevent cryogen escape throughout a building.D) the fastest, and safest, way is to simply pour from one vessel into another.ANSWER: B9.The process of “quenching” A) occurs when there is a rapid release of vaporized cryogen.B) is both inevitable and desirable when using liquid cryogens.C) poses little hazard other than hearing damage.D) involves the destruction of the cryogen by using a very hot solid object.ANSWER: A10.What practice is risky when using a cryogen?A) Wearing “loose” gloves.B) Wearing jewelry.C) Handling dry ice with nitrile gloves.D) All of the above.ANSWER: D5.3.10 Runaway Reactions1.A runaway reaction will occur whenA) the rate at which heat produced by a reaction exceed the rate at which it can be absorbed by the surrounding environment.B) a side reaction is exothermic.C) reactions are run in closed vessels.D) impurities in a solvents reduce the heat capacity of the solventANSWER: A2.Runaway reactions A) are rare because excess heat usually slows down exothermic reactions.B) would be common if condensers were not routinely used in most reactions.C) get out of control since as heat is released, the reaction rate increases, which further increases the rate at which heat is released.D) usually self-extinguish when all of the solvent has been vaporized.ANSWER: C3.“Scaling up” a reaction usuallyA) reduces the chance for a runaway reaction because the heat capacity of the system is larger.B) reduces the chance for a runaway reaction because it is harder to add heat to larger systems.C) increases the chance for a runaway reaction because heat transfer occurs at surfaces and the volume-to-surface area value increases.D) increases the chance for a runaway reaction because heat transfer occurs at surfaces and the volume-to-surface area value decreases.ANSWER: C4.Predicting that a reaction will be a “runaway risk” is A) relatively easy if you know the heat of reaction, and the order of the reaction.B) relatively easy if you know the heat of reaction, and the heat capacity of the solvent.C) not very easy since it is usually hard to determine if a reaction will be exothermic or endothermic.D) usually not very easy since many variables contribute to the rates of heat production and absorption in a reaction.ANSWER: D5.What category(ies) of reactions tend to have the most “runaway reaction” events?A) Hydrolysis.B) Alkylation (Friedel-Crafts)C) OxidationD) Polymerization and condensation.ANSWER: D6.Major incidents tend to occur whenA) there have been a series of minor incidents that precede a major incident.B) reaction materials have not been added together properly.C) there is an inadequate understanding of the chemistry and thermodynamics.D) All of the above.ANSWER: D5.3.11 Hazards of Catalysts1.What percentage of manufactured chemical products involve catalytic reactions?A) 10%B) 37%C) 60%D) 95%ANSWER: C2.What is common laboratory procedure that uses a pyrophoric catalyst?A) Esterification.B) Acid neutralization.C) Titrations using oxidants.D) HydrogenationANSWER: D3.Raney? nickelA) is actually an aluminum compound.B) has a high surface area that stores sodium hydroxide solution.C) should be handled only in an inert atmosphere.D) is normally shipped a slurry in acetonitrile.ANSWER: C4.When using precious-metal catalysts,A) they should be kept wet after use.B) the reactions vessels should be first purged with nitrogen or argon.C) reaction vessels should be grounded to prevent static electricity sparks.D) All of the above.ANSWER: D5.When using enzymes as catalysts,A) they must be used in an inert atmosphere.B) precautions must be take to avoid exposures to powdered forms that can cause sensitization reactions.C) protective equipment is generally not required since the enzymes are naturally-occuring.D) working in a chemical hood is necessary only when the enzyme is volatile.ANSWER: C change to B (3/26/10) ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- the royal society of chemistry
- lecture 1 key concepts in stereoselective synthesis
- hydrophobic polymer supported catalyst for organic
- synthesis of indoles by palladium organic reactions
- organic chemistry 6th ed
- com
- chapter 15 polar addition to carbon carbon multiple bonds
- laboratory safety for chemistry students home
Related searches
- grants for college students with low inco
- grants for college students with low income
- grammar for esl students worksheets
- scholarships for international students 2019
- grants for college students 2019
- colleges for c students northeast
- canada scholarships for african students 2019
- laboratory test for myocardial infarction
- 504 plan for nc students for medical form
- scholarships for pt students for 2019
- ideas for fire safety for preschoolers
- students home page fwisd