Linksys SPA2102 Router Configuration Guide
Linksys SPA2102 Router Configuration Guide
Dear 8x8 Virtual Office Customer, This Linksys guide provides instructions on how to configure the Linksys SPA2102 as a router. You only need to configure your Linksys SPA2102 as a router if you have no separate router, wireless router, or combination broadband modem/router already in your network.
If you already have a router or wireless router connected to your network, you do not need this guide. Just follow the setup instructions on pages 1-5 of the Linksys SPA2102 Installation Guide for Fax and Analog Phone Extensions at
If you do NOT have a router If you don't have a router or wireless router connected to your network, please follow the instructions in this guide to configure your Linksys SPA2102 to work as a router. The guide that follows provides detailed instructions.
Network with Linksys Configured as a Router Please note that the router settings (and other network settings like PPPoE settings) to connect to your Internet service comes from your Internet Service Provider. These settings do not come from 8x8. If you do not know those settings, you may need to contact your Internet Service provider for more information.
Additional 8x8 documentation for using the Linksys SPA2102 with 8x8 service is available at: Support/BusinessSupport/Documentation.aspx
Phone Adapter with Router
User Guide
Voice
Model No. SPA2102
Copyright and Trademarks
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright ? 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
How to Use this Guide
Your guide to the Phone Adapter with Router has been designed to make understanding networking with the Phone Adapter easier than ever. Look for the following items when reading this guide:
This exclamation point means there is a caution or warning and is something that could damage your property or the Phone Adapter.
This question mark provides you with a reminder about something you might need to do while using the Phone Adapter.
This checkmark means there is a note of interest and is something you should pay special attention to while using the Phone Adapter.
In addition to these symbols, there are definitions for technical terms that are presented like this: word: definition.
Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like
this:
Figure 0-1: Sample Figure Description
Figure numbers and descriptions can also be found in the "List of Figures" section.
SPA2102-UG-60613A DF
Phone Adapter with Router
Table of Contents
Chapter 1: Introduction
Welcome What's in this Guide?
Chapter 2: Networking Basics
An Introduction to Local Area Networks The Use of IP Addresses
Chapter 3: Getting to Know the Phone Adapter
The Back Panel The Front Panel
Chapter 4: Getting Started
Before You Begin Connecting the Phone Adapter Configuring the Phone Adapter Placing the Phone Adapter
Chapter 5: Using the Interactive Voice Response Menu
Overview Accessing the Interactive Voice Response Menu Using the Interactive Voice Response Menu Entering a Password Configuring the Settings for Your Internet Phone Service
Chapter 6: Using the Web-based Utility
Overview How to Access the Web-based Utility The Router Tab The Voice Tab
Phone Adapter with Router
1
1 2
5
5 5
7
7 8
9
9 9 11 13
15
15 15 16 21 22
23
23 24 25 34
Phone Adapter with Router
Appendix A: Troubleshooting
45
Common Problems and Solutions
45
Frequently Asked Questions
56
Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter
61
Windows 98 or Me Instructions
61
Windows 2000 or XP Instructions
62
For the Phone Adapter's Web-based Utility
62
Appendix C: Windows Help
63
Appendix D: Glossary
65
Appendix E: Specifications
69
Appendix F: Warranty Information
75
Appendix G: Regulatory Information
77
Appendix H: Contact Information
85
Internet Telephony Service Provider (ITSP)
85
Linksys
85
List of Figures
Figure 3-1: Back Panel Figure 3-2: Front Panel Figure 4-1: Connect a Telephone Figure 4-2: Connect a PC Figure 4-3: Connect to the Modem Figure 4-4: Connect Power Figure 4-5: Login Screen Figure 4-6: Router - WAN Setup Screen Figure 4-7: MAC Clone Settings Figure 4-8: Static IP Settings Figure 4-9: PPPoE Settings Figure 4-10: Measurement between Wall-Mount Slots Figure 6-1: Login Screen Figure 6-2: Router - Status Screen Figure 6-3: Router - WAN Setup Screen Figure 6-4: Static IP Settings Figure 6-5: PPPoE Settings Figure 6-6: Router - LAN Setup Screen Figure 6-7: Router - Application Screen Figure 6-8: Voice - Info Screen Figure 6-9: Line 1 Status Figure 6-10: Voice - System Screen
Phone Adapter with Router
7 8 9 10 10 10 11 11 11 12 12
13 24 25 27 27 27 30 32 34 35 38
Phone Adapter with Router
Figure 6-11: Voice - User 1 Screen
39
Figure 6-12: Speed Dial and Supplementary Service Settings
41
Figure 6-13: Distinctive Ring and Ring Settings
42
Figure B-1: IP Configuration Screen
61
Figure B-2: MAC/Adapter Address
61
Figure B-3: MAC/Physical Address
62
Figure B-4: MAC Address Cloning
62
Chapter 1: Introduction
Phone Adapter with Router
Welcome
Thank you for choosing the Phone Adapter with Router. This Phone Adapter will allow your computers to share a high-speed Internet connection as well as resources, including files and printers. And after you have set up your Internet phone service, also known as Voice over Internet Protocol (VoIP), you will be able to make phone or fax calls using the Internet.
How does the Phone Adapter do all of this? By connecting your computers and peripherals, including phones or fax machines, to the Phone Adapter and connecting the Phone Adapter to your cable or DSL modem, then the Phone Adapter can direct and control communications for your network. Each of the Phone Adapter's two telephone jacks can operate independently, with separate phone service and phone numbers, so you can have up to two Internet phone lines per Adapter.
But what does all of this mean?
Networks are useful tools for sharing Internet access and computer resources. Multiple computers can share Internet access, so you don't need more than one high-speed Internet connection. With Internet phone service, your Internet access can now be shared by your phones or fax machines as well. You will be able to make phone calls using the account you set up with your Internet Telephony Service Provider (ITSP), even while you're surfing the Internet. Plus, you can access one printer from different computers and access data located on another computer's hard drive. Networks are even used for playing multiplayer video games. So, networks not only are useful in homes and offices, but also can be fun.
PCs on a wired network create a LAN, or Local Area Network. They are connected with Ethernet cables, which is why the network is called "wired".
network: a series of computers or devices connected for the purpose of data sharing, storage, and/or transmission between users.
lan (local area network): the computers and networking products that make up the network in your home or office.
ethernet: an IEEE standard network protocol that specifies how data is placed on and retrieved from a common transmission medium.
Chapter 1: Introduction
1
Welcome
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- diamante wifi lynksys e1200 guide stenograph
- answer id 1650 options use the steps below to manually
- how to create an access rule on the linksys gigabit vpn router
- dvr network internet setting
- linksys e9450
- for the linksys e2000 linksys e3000 linksys e4200 and
- manually setting up the linksys re9000
- linksys ea6400 manual
- linksys spa2102 router configuration guide
- setup guide amped wireless
Related searches
- sap dms configuration guide pdf
- 192 168 1 1 wireless linksys router setup
- 192 168 0 1 router configuration page
- how to access linksys router admin page
- 192 168 1 1 linksys router password
- linksys router password
- linksys router sign in
- linksys router setup
- basic router configuration commands pdf
- cisco router vlan configuration example
- linksys router settings
- linksys smart wifi router password