DVR network/internet setting

[Pages:11]DVR Network/ Internet Setting

Connect the DVR to the ROUTER by using RJ45 Network cable. Step 1: DVR setting: Main Menu -> System Setup -> Network setting:

Just enable the DHCP function and Save. Then, reboot the system. After reboot the system, go back to network setting. Write down the internal IP address (For example, 192.168.1.100, we will use this number below as a Sample) which is assigned by your router.

Step 2: Testing Internal Network IP - Open the Internet Explorer browser (must be 6.0 or higher). - Go to Tools, Internet Options :

- Chose: Security - Uncheck "enable Protected Mode" (I.E. 7 don't have this section) - Then, go to "Custom Level"

Ensure these security settings are ENABLE or PROMPT: - Enable: Display video Animation on a webpage that does not use external media player - Prompt: Download unsigned ActiveX Control - Prompt: Initialize and script ActiveX controls not marked as safe for scripting

- then Click OK -> Apply -> OK

After that, put the IP address (for example: 192.168.1.100) in the address bar. And you will see a yellow bar stating that "Your current security settings put your computer at risk. Click here to change your security settings....." DO NOT CHANGE ANY SETTINGS AT THIS POINT. You may do so AFTER the Active X Control is installed and you have successfully log on to your DVR remotely. So when you see below screen. Right click on the yellow bar and install the ActiveX Control. PLEASE KINDLY BE PATIENT, the installation may take longer than expected, it depending on your computer system performance.

Once the ActiveX Control is installed, the Login Screen will be displayed. Then you can simply log on to your DVR by using the correct username and password. Once you login successful, Go to Step 3.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download