The Ideal Gas Constant
The Ideal Gas Constant
Author: John M. Cimbala, Penn State University Latest revision, 06 January 2014
Introduction Students are often confused by the units of the ideal gas constant. This confusion is compounded by the fact that there are two forms of the gas constant: the universal gas constant and the specific gas constant. To avoid confusion and error, these are defined below, along with their relationships with mol and molecular weight. For completeness, numerical values are given in both S.I. and English units.
Mol and Molecular Weight
A mol (sometimes gmol, g-mol, or mole, not to be confused with the rodent) denotes an amount of matter. Specifically one mol is 6.0251 x 1023 molecules of a substance, a standard number of molecules known as
Avogadro's number. Strictly speaking, mol does not have dimensions of mass; rather, mol is a primary
dimension in and of itself, i.e., the amount of matter. Note that some authors, however, treat mol as a unit
of mass. The number of mols of a substance is denoted by the letter n.
Molecular weight (M) is defined as the number of grams (g) per mol of a substance. M is obtained from
standard periodic charts or periodic tables of the elements. For example, the molecular weight of nitrogen is
Mnitrogen = 14.0067 g/mol. Nitrogen in its gaseous or vapor state occurs as a diatomic molecule, N2; thus, Mgaseous nitrogen = 28.0134 g/mol. Since air is made up predominantly of nitrogen gas, the molecular weight of air is very close to that of nitrogen,
M air
28.97 g mol
.
In S.I. units, the kilogram (kg) is preferred over the gram; thus the kilogram-mol (kmol, sometimes kg-mol or kg-mole) is often used instead of the mol. By definition, a kmol is defined as 1000 mol, or 6.0251 x 1026
molecules of the substance. The molecular weight of air in terms of kg and kmol is then
M air
28.97 mol
g
1000 mol kmol
kg
1000
g
28.97
kg kmol
.
In English units, the pound-mass (lbm) is the standard unit of mass. In order to use the same molecular
weights as those listed on the periodic chart, the pound-mol, (lbmol, sometimes lb-mol, lbm-mol, or lbm-
mole) is defined. The molecular weight of elemental (atomic) nitrogen, for example, in English units is
Mnitrogen = 14.0067 lbm/lbmol, and the molecular weight of air is
M air
28.97 lbm . lbmol
Universal gas constant and ideal gas law
The universal gas constant (Ru) is, as its name implies, universal, i.e., the same regardless of the gas being considered.
The ideal gas law in terms of Ru is PV nRuT , where P is the absolute pressure of the gas, V is the
volume occupied by the gas, n is the number of mols of the gas, and T is the absolute temperature of the
gas. [Note that we use the font V for volume to distinguish from V for velocity or speed.]
In S.I. units,
Ru
8.3143 kJ kmol K
=8314.3 J kmol K
.
In the above form of the ideal gas law, since Ru is given in terms of kmol, n must represent the number of kmols of the substance. The mass, m, of the substance in kg is equal to n times the molecular weight, i.e., m
= nM.
In English units,
Ru
1545.4
ft lbf lbmol R
.
In the ideal gas law above, since Ru is given in terms of lbmol, n must represent the number of lbmols of the substance. The mass, m, of the substance in lbm is equal to n times the molecular weight, i.e., m = nM.
Specific gas constant
The specific gas constant (R, sometimes Rgas) is not universal, and its value depends on the specific gas being considered. R is defined as the universal gas constant divided by the molecular weight of the
substance,
R Ru . M
The dimensions of R are not the same as those of Ru, since molecular weight is a not a dimensionless quantity, although some authors treat it as such.
The ideal gas law in terms of R is PV mRT , where P is the absolute pressure of the gas, V is the volume
occupied by the gas, m is the mass of the gas, and T is the absolute temperature of the gas.
For air in S.I. units,
Rair
Ru M
8.3143 kJ kmol K
28.97 kg
0.2870 kJ kg K
287.0 J kg K
.
kmol
For air in English units,
Rair
Ru M
1545.4 ft lbf
lbmol R 28.97 lbm
53.34 ft lbf lbm R
.
lbmol
As a check, one can convert from S. I. to English units, i.e.,
Rair
0.2870
kJ kg K
1 Btu
1.055
kJ
5 9
K R
778.17 ft lbf Btu
0.4536 lbm
kg
53.35 ft lbf lbm R
The disagreement in the last digit is due to round-off errors in the conversion factors.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- more examples on moments pitt
- 1 4 a force of 80 n is supported by the bracket as
- international system of units si units
- the ideal gas constant
- engineering basics cleveland state university
- unit conversion table
- common engineering unit conversions basic units
- torque wrench setting conversion table newton metres
- lecture 3 1 student master copy
- set 1 ccsf