PICDEM 2 Plus - Microchip Technology
| |
|dsPICDEM 80-pin Starter |DM300019 |
| | |
|Uses an 80-pin dsPIC30F6014 plug-in module. Features selectable 5V and 3.3V, LEDs, switches, |[pic] |
|potentiometer, UART interface, A/D input filter circuit for speech band signal input, on-board DAC and | |
|filter for speech band signal output, prototyping area, assembly language demonstration program and | |
|tutorial. | |
|It can accommodate the 80-pin dsPIC30F6010 plug-in module and the100- to 80-pin adapter dsPIC33F plug-in | |
|module.. | |
| |
|16-Bit 28-Pin Starter Board |DM300027 |
|Supports 28-pin PIC24 microcontrollers or dsPIC Digital Signal Controller (DSC) devices with features |[pic] |
|including on-board regulators for 3.3V or 5V operation, power input from 9V power supply or USB power | |
|source, single UART communication channel via USB bridge, connectors for MPLAB® ICD 2 In-circuit | |
|Debugger/Programmer and PICkit™ 2, header for access to all device I/O pins, and circuit prototyping area | |
|including pads for SOIC and SOT-23 devices. | |
| |
|dsPICDEM 28-pin Starter |DM300017 |
| | |
| | |
| | |
|No longer available. Replaced by the 16-bit 28-pin Starter Board (DM300027) above. . |[pic] |
| |
|dsPICDEM 1.1 Plus |DM300024 |
| | |
|Features an active demonstration program loaded on the installed dsPIC30F6014A device. Several program |[pic] |
|functions are selectable via a menu system displayed on the LCD. These include: temperature and voltage | |
|measurements, frequency domain characteristics of a sinewave signal generated on-board from a digital | |
|potentiometer, FIR and IIR digital filter selections and DTMF tone generation using the Codec interface | |
|peripheral (external speaker required). | |
| |
|dsPICDEM 2 |DM300018 |
|Sockets are provided for 28 and 40-pin devices in the motor control family and 18-, 28- and 40-pin devices|[pic] |
|in the general purpose and sensor family. | |
|The board includes a sample dsPIC30F4011 Digital Signal Controller in the 40-pin motor control socket, a | |
|power supply regulator, crystal oscillators for each set of sockets, and both RS-232 and CAN ports for | |
|external communication. In addition, the board is populated with prototyping hardware, including LED | |
|indicators, push button switches, a potentiometer, a temperature sensor and a 2x16 LCD screen. All pins on| |
|all the devices are accessible through headers.. | |
| |
|dsPICDEM MC1 Motor Control |DM300020 |
| | |
|The three main components are: dsPICDEM™ MC1 Motor Control Development Board, dsPICDEM MC1L 3-Phase Low |[pic] |
|Voltage Power Module and dsPICDEM MC1H 3-Phase High Voltage Power Module. | |
|The dsPICDEM MC1 Motor Control Development Board contains the dsPIC30F6010 but supports all dsPIC Digital | |
|Signal Controller motor control variances, various peripheral interfaces and a custom interface header | |
|system, which allows different motor power modules to be connected to the PCB. The control board also has | |
|connectors for mechanical position sensors such as incremental rotary encoders and hall effect sensors, | |
|and a breadboard area for custom circuits. | |
| |
| 1 |DM300004-1 |
| | |
|Provides the hardware circuitry for supporting both the Public Switched Telephone Network (PSTN) and |[pic] |
|10-Base T MAC/PHY interfaces. The PSTN interface hardware on the 1 board is suited for | |
|FCC/JATE compliancy. | |
|The board comes with an ITU-T compliant V.22bis/V.22 modem demonstration module pre-programmed on the | |
|installed dsPIC30F6014 device. This demo, provided with full source code, enables the user to connect and | |
|transfer data between the dsPIC Soft Modem and an ITU-T compliant reference modem. The modem can be | |
|configured for either the originate or answer mode of operation. | |
| |
| 2 |DM300004-2 |
| | |
| | |
| | |
|CTR-21 compliancy is supported on 2. The board comes with an ITU-T compliant V.22bis/V.22 |[pic] |
|modem demonstration module pre-programmed on the installed dsPIC30F6014 device. This demo, provided with | |
|full source code, enables the user to connect and transfer data between the dsPIC Soft Modem and an ITU-T | |
|compliant reference modem. The modem can be configured for either the originate or answer mode of | |
|operation. | |
| |
|PICDEM Low Voltage Motor Control |DM183021 |
| | |
| | |
| | |
|Supports 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers. The board is capable of |[pic] |
|controlling motors rated up to 48V and 2.2 amps. | |
|The development board also comes with two pre-programmed, Flash-based devices for easy development: the | |
|PIC18F2431 device will populate the 28-pin socket and the dsPIC30F3010. Additionally, the board comes with| |
|a free Motor Control Graphical User Interface (MC-GUI) which can set and modify all motor parameters. | |
|The board has a motor terminal strip, 3-phase voltage source inverter bridge, motion sensor inputs, | |
|over-current protection, level programmable using potentiometer, temperature sensor, push button switches,| |
|9 LEDs, test points for motor current and back EMF sensing, speed control potentiometer, RS-232 port, and | |
|example software and documentation CDROM. | |
|Explorer 16 100-pin |DM240001 |
|The Explorer 16 is a low cost, efficient development board to evaluate the features and performance of |[pic] |
|Microchip's new PIC24 Microcontroller and dsPIC33 Digital Signal Controller (DSC) families. Coupled with | |
|the MPLAB ICD 2 In Circuit Debugger, real-time emulation and debug facilities speed evaluation and | |
|prototyping of application circuitry. The Explorer 16 100-pin features two interchangeable Plug-In Modules| |
|(PIMs), one each for the PIC24FJ128GA010 and the dsPIC33FJ256GP710 DSC. | |
|Explorer 16 44pin |DM240002 |
|The Explorer 16 is a low cost, efficient development board to evaluate the features and performance of |[pic] |
|Microchip's new PIC24 Microcontroller and dsPIC33 Digital Signal Controller (DSC) families. Coupled with | |
|the MPLAB ICD 2 In Circuit Debugger, real-time emulation and debug facilities speed evaluation and | |
|prototyping of application circuitry. The Explorer 16 44-pin features a Plug-In Module (PIM) for the | |
|PIC24FJ64GA004. | |
|Motor Control Interface PICtail Plus D-Card |Buy AC164128 |
|This PICtail MC board interfaces with Explorer 16 (DM240001) and the HV/LV Power Module (DM300021 and |[pic] |
|DM300022). It has a variety of test points that will make debugging of your application easier. It also | |
|has hardware support for sensor and sensor-less applications such as Hall sensors, optical encoder, back | |
|EMF and current sensing. This uses dsPIC33F device family for the MC development as opposed to the | |
|DM300020 that targets dsPIC30F for the MC application development. | |
|dsPIC33FJ256MC710-I/PT PIM |MA330013 |
|PC Board with 100-pin dsPIC33FJ256MC710 DSC sample. Use with Explorer 16, DM240001, Development Board |[pic] |
|Explorer 16 Starter Kit |DV164033 |
|The Explorer 16 Starter Kit is a complete set of tools for application development using Microchip’s |[pic] |
|PIC24F, PIC24H, and dsPIC33 16-bit microcontrollers. The kit includes a MPLAB® ICD 2 In Circuit Debugger, | |
|an Explorer 16 Development Board, a 9V universal power supply that can be used for either the Explorer 16 | |
|Development Board or the MPLAB ICD 2 in-circuit debugger, a serial cable, and both a PIC24FJ128GA010 and a| |
|dsPIC33F256GP710 device (mounted on plug-in modules for quick replacement). Also included with the kit is | |
|Microchip’s MPLAB Integrated Development Environment (IDE), the Student Edition of the MPLAB C30 C | |
|Compiler for Microchip’s 16-bit devices, with tutorials and user manuals on CDROM. The complete kit | |
|introduces the developer to Microchip's new family of 16-bit microcontrollers with all the tools for | |
|writing code in C, hardware debugging the application and programming devices. | |
|dsPICDEM SMPS Buck Development Board |DM300023 |
|The dsPICDEM SMPS Buck Board provides an easy and economical way to evaluate the dsPIC30F202x/1010 SMPS & |[pic] |
|Digital Power Conversion family of components and provides an educational and prototyping platform to | |
|investigate digital power conversion and digital Switch Mode Power Supply (SMPS) design. The board | |
|includes a socketed dsPIC30F2020 device connected to power devices and circuitry for controlling | |
|independent low power DC to DC Synchronous Buck Converter circuits as well as support, debug and | |
|communication circuitry. | |
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
Related searches
- airborne plus immune booster reviews
- frontline plus flea tick treatment
- frontline plus for dogs amazon
- walmart frontline plus for dogs
- fafsa parent plus loan
- walmart frontline plus for cats
- microsoft calculator plus windows 10
- frontline plus for dogs
- cheapest frontline plus for cats
- microchip tool tracking gps systems
- technology etfs best technology etfs
- found animals microchip registry reset