CALCULATOR KEYSTROKES – CHAPTER ZERO – …
CALCULATOR KEYSTROKES – CHAPTER ZERO – GENERAL ITEMS FOR ALL HS MATH CLASSES
(Page one)
Your initials confirm that you have read, understood, & successfully tried each *** item.
Additional resources can be found on our class website: millercfca.
1 Turning on/off Initials: Date:
***On Press [ON] button
***Off Press [2nd] [ON]
2 [2nd] and [ALPHA] keys Initials: Date:
How to use [2nd] functions Press [2nd] and desired key ***[2nd] [^] = π
How to use [ALPHA] keys Press [ALPHA] and desired key ***[ALPHA] [STO>] = x
3 Adjusting Display Initials: Date:
How to make screen lighter ***Press [2nd] and [↓] (cursor down) “1” is lightest
How to make screen darker ***Press [2nd] and [↑] (cursor up) “9” is darkest
(I usually leave my contrast set around “5” or “6” for best visibility of numbers/graphs.)
4 Moving Cursor and [CLEAR} Initials: Date:
To move cursor ***use directional arrow keys [↑][↓][←][→]
5 [ENTER] Initials: Date:
To enter data or to complete a calculation ***[2] [+] [4] [ENTER] . . . “6”
6 [MODE] – Initials: Date:
The [MODE] button is located to the immediate left of the [2nd] button.
Modes most commonly used in CFCA math classes are underlined.
~ Normal / Sci / Eng numeric notation
~ Float / 0123456789 number of decimal places
~ Radian / Degree unit of angle measure
~ Func / Par / Pol / Seq type of graphing
~ Connected / Dot continuous (connected) vs. discrete (dot)
~ Sequential / Simul graph points draw in sequence or sequence
~ Real / a+bi / re^0 real, rectangular complex, polar complex
~ Full / Horiz / G-T full, horizontal, and graph-table split screen
~ MathPrintTM / Classic display shown in textbook type display vs. classic display
~ n/d … Un/d display as a simple fraction vs. as a mixed number
***Experiment with changing/using various modes. Reset to above settings when done.
CALCULATOR KEYSTROKES – CHAPTER ZERO – GENERAL ITEMS FOR ALL HS MATH CLASSES
(Page two)
Your initials confirm that you have read, understood, & successfully tried each *** item.
Additional resources can be found on our class website: millercfca.
7 Using the menus & catalogs Initials: Date:
[MATH] = This results in a display of several options for calculations:
MATH = fractions to/from decimals, cube, cube root, xth root, min/max, etc.
NUM = absolute value, LCM, greatest common denominator
CPX = complex number calculations
PRB = probability (random numbers, permutations, combinations, etc.)
***Find the cubed root of 4, 913. ___________
***Find the LCM of 72 and 44. ___________
***List TEN random numbers given. _________________________________
[2nd] [0] will access the CATALOG menu on the screen.
This is a ABC listing of all processes available for you to use on the calculator.
Move the cursor by using directional keys[↑][↓][←][→].
Once you find the process you wish to use, press [ENTER].
That process will appear – and further data can be entered to perform process.
***Scroll through all CATALOG options.
***List ten options: __________________________________________________
8 Entering an expression Initials: Date:
You can enter various combinations of numbers, variables, operations, and functions.
Use the keypad to enter digits 0-9. Use the keypad to enter operations: +/-/x/÷
Use various other keys, or [MENU] to find/use other functions.
Press [ENTER] to evaluate your entered expression.
If an ERROR is returned, you may GO TO and repair, or QUIT.
***Evaluate 17+12-6*18 __________________________________________________
***Does the calculator automatically use PEMDAS? ___________
9 Graphing Initials: Date:
Press [Y=] button under screen on left side to add/edit/enter/remove any equations.
Enter equation, such as [ALPHA] [STO>] [+] [4] . . . . “Y1 = 6X + 4”
Set screen window by Pressing [WINDOW] . . . The most commonly used window is:
~ Xmin = -10, Xmax = 10, Xscl = 1, Ymin = -10, Ymax = 10, Yscl = 1 (adjust all as needed)
Press [GRAPH] to view a graph of the equation.
Press [TRACE] while viewing a graph to trace the values, listed at screen bottom.
Press [ZOOM] to zoom in or zoom out in viewing the graph.
Press [2nd] [GRAPH] to view the data in table/tabular format.
*** “Y1 = 6X + 4” – Graph, view table, zoom, set window, trace this equation.
CALCULATOR KEYSTROKES – CHAPTER ZERO – GENERAL ITEMS FOR ALL HS MATH CLASSES
(Page three)
Your initials confirm that you have read, understood, & successfully tried each *** item.
Additional resources can be found on our class website: millercfca.
10 Apps Initials: Date:
Apps are programs that perform specific calculations/processes on your calculator.
Apps may be preloaded on your calculator. Press [APPS] to view these.
Apps may be downloaded from a computer using a mini-USB cable.
Apps may be downloaded from another TI calculator using a mini-USB cable.
SENDER: Press [2nd] [LINK] Select app via [↑][↓] then press [ENTER].
RECEIVER: Press [2nd] [LINK] then press [→] [ENTER]. Look for APP in APP menu.
***Try at least three (3) apps on your calculator. List them: ______________________
11 Other Initials: Date:
***Find at least three other specific tasks you can accomplish on your calculator.
***List each below, give an example, provide the keystrokes to complete the tasks.
***Try each one yourself as well.
A.
B.
C.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- zero zero zero lease deals
- chapter by chapter bible summary
- zero down zero interest car deals
- computer keystrokes for symbols
- keystrokes for symbols in windows
- chapter by chapter summaries
- novel outline template chapter by chapter pdf
- chapter 9 chapter review answers
- outsiders chapter summary chapter 5
- emoji keystrokes list
- genesis chapter by chapter summary
- bankruptcy calculator chapter 7