说明书 - Banggood



K8 Instruction for use

一、The structure of the device

[pic][pic]

二、listing

|order |accessories |number |

|1 | Gps tracker |1 |

|2 |User manual |1 |

|3 |Charging cable, SIM card cover |1 |

三、detail instructions

1.Please open package, check model and accessories.

2.Please pick up the device, prepare one SIM card(notice: support small SIM card only, GPRS service& caller identification should be opened) ,prepare one worked phone.

3. Please open the device, confirm if powered or not. Red light will flash after pressing the power button, if red light doesn’t flash, please charge and restart it.

4.Please Record the IMEI number (this IMEI number is app login account), put the SIM card into the cardholder as above picture correctly. power off the device on the setting-menu page, Make sure device is closed when you want to change SIM card.

5.Please check if GSM service is available. You can try to call device by SIM card number, if device can receive the call, means service is okay, then installation is finished.

6. If the SIM card is installed incorrectly or SIM card can’t work properly, red light will keep flashing. Only SIM card is installed correctly and SIM card work properly, after powered on, red flash once, when you press the power button again, green light will flash, means device is ready to work.

7.

|Charging without SIM card |Red light will flash |

|Full charged without SIM card |No light flash |

|Charging with SIM card |Green light will flash |

|Full charged with SIM card |Red light keep flashing |

|Out of power |No light flash |

四、Smart phone Setting

1． Download APP&login

1）Please scan QR on the bottom of the user manual cover page, download it. For iphone user, please open the trust permission on general page.

Please open APP on the smart phone, login by IMEI number(15 numbers), enter password(the original password is 123456).

2） On the top of the APP home page, device will display “Offline” “Static””Movement”and power condition.

[pic][pic]

2. Setting

1） Please enter Setting menu, click “Center number setting” ,Set a main phone number, device will send the warning message to this phone number(like low power, out of e-fence). The other functions can’t work well till this main phone number is set.

2）Please open Shock sensitivity&Telephone call , click “high””standard””low”, device will judge shocking extent automatically. “off”means stop this function. Any of shock sensitivity model is selected, it shows green color. Telephone call has “on” “off”selections. When the shocking extent reaches to the selected model, meanwhile telephone call is open. Device will give a call to Center number. If the device keeps shocking, device will give a call to the Center number every two minutes. Any one is close, no telephone call is delivered to the Center number.

[pic][pic]

3）Upload interval, means the frequency of tracking historical path. There are “ Tracking every 1 minute” , ” tracking every 10minutes” , “ tracking every 1 hour”, “ tracking every 12 hours”. For example. If you select “ tracking every 10 minutes” . Device will update the position date every 10 minutes. User can set it base on actual requirement. The tracking time is longer, standby time will be longer, please be serious of your choice.

4）Other function of setting: Remote shutdown.

3. Live tracking

1）Enter live tracking menu. You can check the device position, living map will show if it is tracked by “GPS” or “LBS”, you also can enlarge or smaller map by “+ ”or ”-”.

4. Historical route

Historical route can check the nearest three month routes. Any period can be seen clearly.

[pic]

5. Geofence

Enter geofence menu, Name the fence first, enlarge or smaller fence radius by“+” or ”-”remarks and save it. Center number phone will receive message when the device is out of the set geofence.

[pic]

6. Voice care

Enter voice care menu, device will call the center number automatically. When the call is connected, smart phone can catch the voice from device side.

7. Other functions。

1）Warning message: can check the every message from device, for example: shock warning, IOS warning, offline warning, low powered warning, out of geofence warning.

2）Peripheral tracking: can track the sounding environment of smart phone position: like parking place, food, gas station, bank, hotel, bus station, supermarket,amusement. Iphone don’t have this function.

3）Change password: User can change the login password personally.

4）Exit: click exit, smart phone will not receive any message from device. If you don’t click this button, device will still work and send message to the smart phone.

FAQ

1： When smart phone call the device: the subscriber you dialed is busy now(means your SIM card hasn’t open caller identification service)

2：Setting dictation on the APP, device keeps showing “sending ” or ”failed to send”: a device don’t have signal, unable to send GPRS dates; b SIM card hasn’t open GPRS service, suggest you to open a 30M GPRS service; c device is busy, when GSM works, GPRS date transformation quite automatically.

3：APP always offline: a SIM card out of fees, no GPRS or GSM service; b Device is close or no power; c the environment around device is bad, signal is weak or no signal(this problem cause date can’t update to the server)

4：The distance between real position and tracking position is more than hundreds meters: means device is working under LBS service condition. LBS tracking accuracy is related to the density of the LBS station. Normally, the accuracy of LBS service tracking is from 50-1000 meters.GPS is 5-10 meters

Tip: This product is mainly applicable to bicycle, luggage. Don’t use this device to follow up or wiretap others privacy messages or other similar illegal things. ALL illegal results responsibilities should be taken by users! Origin company will not take any responsibilities.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download