SuccessMaker Enterprise 1 - RM



SuccessMaker Enterprise 1.7.2 SP2

Standalone Installation Guide

Microsoft Windows XP

Microsoft Windows Vista

Microsoft Windows 7

Released May 2011

Copyright © "SuccessMaker Enterprise" is a trademark owned by Pearson Education, Inc. or its affiliates and licensed to RM Education plc. All rights reserved.

SuccessMaker is a registered trademark of Pearson Education, Inc. or its affiliates.

Sybase is a registered trademark of Sybase, Inc.

The data and names used to illustrate the screen images may include names of individuals, schools, companies, brands and products. All of the data and names are fictitious; any similarities to actual names are entirely coincidental.

This version of the SuccessMaker software was adapted for use within the United Kingdom by RM Education plc under licence from Pearson Education, Inc.

United Kingdom Localised Content: Copyright © 2011 RM Education plc. All rights reserved.

Text from Pearson Education Installation guides has been localised with permission from Pearson Education, Inc.

All other rights, including copyright and trade secret rights, in this software product, owned and reserved by Pearson Education Inc. and its licensors. Copyright © 2011 Pearson Education, Inc. All rights reserved.

This software product may only be used under licence as expressly authorised by RM Education plc.

Release 2 Installation Guide – 23/02/2012

Contents

Introduction 4

Basic Requirements 4

Microsoft Windows Workstations 4

Installation Checklist 5

Software 5

Additional information required 5

Installing SuccessMaker Enterprise 1.7.2 SP2 6

Creating a Shared Folder for Windows Workstations 6

Installing Sybase Adaptive Server Anywhere 9 6

Installing Sybase Adaptive Server Anywhere 3850 EBF 7

Installing Sybase Adaptive Server Anywhere 3951 EBF 8

Installing the SuccessMaker Enterprise 1.7.2 Management System 8

Configuring the SuccessMaker Enterprise SQL Service 9

Installing SME Courseware 10

Installing SME 1.7.2 interface 12

Adding the course license code 14

Running the UK Localisation CD 14

Installing Service Pack 1 15

Installing Service Pack 2 15

Creating a test pupil user 16

Testing SuccessMaker Enterprise 16

Backing up your SME Database 18

Troubleshooting your installation 19

SME SQL Service start issues 19

JZ006 errors when launching SuccessMaker Enterprise client 19

“Unable to load the program. Please check your network connection and try again.” 20

“Please insert SuccessMaker DVD 1 in to the CD-ROM drive.” when launching courses 20

Introduction

SuccessMaker Enterprise 1.7.2 SP2 includes support for Microsoft Windows XP, Microsoft Windows Vista and Microsoft Windows 7 computers both 32 and 64bit platform.

Basic Requirements

Microsoft Windows Workstations

• Microsoft Windows XP Professional SP2

• Microsoft Windows Vista Ultimate

• Microsoft Windows Vista Business

• Microsoft Windows 7

• TCP/IP is installed and configured with a static IP address

• Screen resolution of 1024 x 768 or above (widescreen resolutions are supported)

• 8 GB of free disk space. This comprises the SuccessMaker program and the course content files.

• A DVD drive required for installation of the product.

• Adobe® Reader® software installed to view the PDF documentation. You can download this free from .

• QuickTime® Player version 7.2.x or later installed to view lessons. You can download QuickTime free from quicktime/download.

Installation Checklist

To complete the installation successfully, it is essential that you have the following resources and information on hand. Please complete the checklist below before starting installation.

Software

You will require the following installation disks

• SuccessMaker Enterprise v1.7.2 Installation DVD

• SuccessMaker Enterprise v1.7.2 Content DVD

• SuccessMaker Enterprise v1.7.2 Service Pack 1 & 2 Installation CD

• SuccessMaker Enterprise v1.7.2 UK Localisation and RM Community Connect Package

Additional information required

An appropriate administrative user name and password for the station:

User name: _______________________________

Password: _________________________________

IP address of Station: _________________________________

Courseware licence key. If you can’t locate this key please contact RM Support who can issue a new one. Call us on 0845 404 0000 or email lightboxsuppport@

Licence Key: _________________________________

Installing SuccessMaker Enterprise 1.7.2 SP2

Note: SuccessMaker Enterprise runs through a shared folder and mapped drive on a standalone computer. This allows the course content to be run from the hard drive rather than inserting a DVD each time its run.

Creating a Shared Folder for Windows Workstations

Before you install SME 1.7.2 SP2, you must create a shared folder on your server for your network users.

1. Create a new folder on the local C: drive called SME

2. Right-click the new SME folder click Properties

3. Click the Sharing tab

4. Click the Share this folder radio button

• Enter SME as the share name

• Enter SuccessMaker Enterprise 1.7.2 as a comment click Permissions

[pic]

5. Highlight the Everyone group

• tick the Full Control box in the Allow column Click OK, OK

[pic]

Installing Sybase Adaptive Server Anywhere 9

Insert the SuccessMaker Enterprise 1.7.2 Installation DVD in to the servers DVD drive

1. Click the Start button and then click Run.

• Enter X:\Sybase\anywhere\Win32\setup.exe (where ‘X:’ is the drive letter for your CD ROM drive). click OK

2. Setup has detected that you are running on a 64-bit computer. To install the 64-bit version of SQL Anywhere, terminate this install, insert the Windows 64bit CD, and run Setup. Do you want to terminate now? click No

3. Welcome click Next

4. License Agreement

• Select United Kingdom

• Select I accept the terms of this agreement option click Next

5. Choose Location click Next

6. Choose Shared Components Location click Next

7. Select Components click Next

8. Server License

• Enter your school name in the Name and Company fields

• Enter 1000 in the Licensed Units field

• Select Networked Seat (per-seat) model click Next

9. Select Program Folder click Next

10. Start Copying Files click Next

11. Setup Complete

• Deselect Yes I want to view the iAnywhere Online Resources click Finish

12. InstallShield Wizard Complete

• Select No, I will restart my computer later click Finish

Installing Sybase Adaptive Server Anywhere 3850 EBF

Insert the SuccessMaker Enterprise 1.7.2 Installation DVD in to the stations DVD drive.

1. Click the Start button and then click Run.

• Enter X:\Sybase\EBF\Win32\setup.exe (where ‘X:’ is the drive letter for your CD ROM drive). click OK

2. Choose Setup Language click Next

3. Setup has detected that you are running on a 64-bit computer. To install the 64-bit version of SQL Anywhere, terminate this install, insert the Windows 64bit CD, and run Setup. Do you want to terminate now? click No

4. Setup has detected that this system does not support short file names (8.3). This will prevent some of the sample databases from being generated during the install click OK

5. SQL Anywhere 9 EBF click Next

6. License Agreement

• Select United Kingdom

• Select I accept the terms of this agreement option click Next

7. Choose Location click Next

8. Choose Shared Component Location click Next

9. Choose Samples Location click Next

10. Select Components click Next

11. Start Copying Files click Next

12. Setup Complete

• Deselect Yes, I want to view the ReadMe file click Finish

Installing Sybase Adaptive Server Anywhere 3951 EBF

Insert the SuccessMaker Enterprise v1.7.2 Installation DVD in to the stations DVD drive.

1. Click the Start button and then click Run.

• Enter X:\EBF3951\SA9_Full_WIN32.902_EBF_3951.exe (where ‘X:’ is the drive letter for your CD ROM drive). click OK

2. Welcome to the IntallShild Wizard for Adaptive Server Anywhere click Next

3. Choose Setup Language click Next

4. Setup has detected that you are running on a 64-bit computer. To install the 64-bit version of SQL Anywhere, terminate this install, insert the Windows 64bit CD, and run Setup. Do you want to terminate now? click No

5. SQL AnyWhere 9 EBF click Next

6. License Agreement

• Select United Kingdom

• Select I accept the terms of this agreement option click Next

7. Choose Location click Next

8. Choose Shared Components Location click Next

9. If you see a message stating you are using Windows Vista and access to the Program Files folder click OK

10. Choose Samples Location click Next

11. Select Components click Next

12. Start Copying Files click Next

13. Setup Complete

14. Deselect Yes, I want to view the ReadMe file click Finish

Installing the SuccessMaker Enterprise 1.7.2 Management System

Note: This Management System installation will only installed to a mapped drive letter. Ensure that the SME folder is mapped on the station before running the installer.

1. Open Windows Explorer.

2. On the Tools menu, select Map Network Drive

• In the Drive select the drive you will be mapping on the client computers

• In the Folder box type \\StationName\SME click Finish

[pic]

Insert the SuccessMaker Enterprise 1.7.2 Installation DVD into the DVD drive

1. Click the Start button and then click Run. Enter X:\School\setup.exe (where ‘X:’ is the drive letter for your CD ROM drive). click OK

2. Welcome to Pearson click Next

3. Pearson Setup Instructions click Yes

4. Installation Type, Select Local Server Installation click Next

5. Select Drive

• Select the drive you have mapped click Next

6. Database Server Information

• IP Address – This stations fixed IP address

• Port # - Leave the default 2638 TCP port click Next

7. Server Information click Next

8. Information Summary click Next

9. Product Registration

• Lab Name – Enter your school name (the text entered here is displayed on the login screen for SuccessMaker Enterprise)

• Lab Number – Enter your RM Customer ID

• Database ID – Leave default click Next

10. Product Registration Summary click Next

11. Click Finish to Complete Installation click Finish

Configuring the SuccessMaker Enterprise SQL Service

This section details how to create the SQL Database service for SuccessMaker Enterprise 1.7.2 SP1

Note: If you are setting up multiple standalones and they are connected to the same network infrastructure, each SQL database must have a unique name on each computer. The ‘-n SME’ should be set as ‘-n SME1’, ‘-n SME2’ and so on.

1. From the Windows Task bar click Start > Programs > SQL Anywhere 9 > Sybase Central

2. Highlight Adaptive Server Anywhere 9 from the folder list

3. Choose the Services tab

4. Click the New Service icon in the toolbar. [pic]

5. The Create a New Service wizard is displayed

6. Type SME as the new Sybase service name click Next

7. Which type of service do you wish to create?

• Select Network Database Server click Next

8. What executable do you want to use for this service?

• Leave default click Next

9. What Parameters do you want to use for this service?

-n SME -qp -ti 0 -x tcpip C:\SME\ResultsManager\SuccessMaker\database\SME.db

[pic] click Next

Important: In the parameters above, C: is the physical drive letter to where you installed the SuccessMaker Enterprise Management System. Ensure that you do not enter the mapped drive letter in the command line.

10. Under which account do you want this service to run?

• Select Local system account

• Deselect Allow service to interact with desktop. click Next

11. Which startup type do you want to use for this server?

• Select Automatic click Next

12. Select the Start the service now box click Finish

13. In Sybase Central services, check that the service is running, and then close the program.

[pic]

Installing SME Courseware

Insert the SuccessMaker Enterprise 1.7.2 Content DVD

1. Click Start, then Run. Type X:\setup.exe (where X: is the drive letter of your DVD drive) click OK

2. Introduction click Next

3. Install Location

• Select your SME mapped drive click Next

4. Choose Install Set, ensure only the following 12 courses are ticked. The other courses are not activated and will not run, so installing them will waste 3.5 GB of disk space.

• Discover English

• First Adventure Bookshelf

• Initial Reading

• Maths Concepts and Skills

• Math Investigations

• Math Processor

• Reading Adventures

• Reading Investigations

• Reading Readiness

• Reader’s Workshop

• Spelling Skills

• Writer’s Studio click Next

5. Pre-Installation Summary click Install

6. Install Complete click Done

7. Remove the DVD from the drive.

Installing SME 1.7.2 interface

This section tells you how to set up SME 1.7.2 on your Microsoft Windows clients.

[pic]

The SuccessMaker Enterprise program runs through a mapped drive, and it is essential that this drive is available to all users of the program on logon to the computer.

Some SuccessMaker Enterprise courses require QuickTime 7.2 or later installed. Ensure you have installed this before proceeding.

Note: Before you can run setup.exe on a Windows Vista or Windows 7 workstation, you may need to turn off User Account Control (UAC).

1. Click the Start button and then Run. Enter M:\ResultsManager\SuccessMaker\WorkSt\Setup.exe (where M: is your mapped drive letter) click OK

[pic]

2. Introduction click Next

Note: On Windows Vista and Windows 7 computers it may ask which drive letter you are installing the client program from. See screen shot below. Windows 2000/XP will skip this stage.

[pic]

3. Pre-Installation Summary click Install

4. Install Complete click Done

5. System Restart Required click Yes

A shortcut to SuccessMaker Enterprise is created on the Desktop and also within the Programs structure off the Start menu. You will need to make sure that this shortcut is distributed to your pupil and staff desktops for the required users.

[pic]

Adding the course license code

NOTE: If you can’t locate your course license code, please contact RM Support who will be able to supply you with one.

1. Logon to your test workstation as a standard pupil user.

2. Click Start, All Programs, Core Programs and then select the RM SuccessMaker Enterprise shortcut. The SuccessMaker Enterprise login screen should now load.

3. Login using

User = sysman

Password = smelearn

4. Click on the Teacher Standard interface.

5. From the Resource menu, select License Manager.

6. From the License Key menu, select Add a License Key.

7. Enter the course license key exactly as it is shown on your paperwork and click OK.

8. From the View menu, select License Keys and ensure that you have the correct number of licenses for courses you have purchased.

9. From the Licence Key menu, select Exit.

10. From the File menu, select Exit

11. Press Escape to close SuccessMaker Enterprise

Running the UK Localisation CD

The UK Localisation CD sets the correct regional settings for the courses which support it, and copies on the UK specific course reports.

Insert the SuccessMaker Enterprise 1.7.2 UK Localisation CD into the DVD drive

NOTE: The Localisation installer may ask you for the path to certain files.

DBISQL.EXE

32bit Windows c:\Program Files\Sybase\SQL Anywhere 9\win32\dbisql.exe

64bit Windows c:\Program Files (x86)\Sybase\SQL Anywhere 9\win32\dbisql.exe

SME.DB

C:\SME\ResultsManager\SuccessMaker\Database\SME.DB

1. If the program does not automatically start, click Start, and then click Run. Type X:\Setup.exe (where X: is the drive letter of your CD drive) click OK

2. Introduction click Next

3. Choose your report type

Select the correct region for your schools location.

National Curriculum Levels

Displays National Curriculum levels for students in the following course reports:

▪ Maths Concepts and Skills

▪ Reading Readiness

▪ Initial Reading

▪ Reader’s Workshop

Scottish 5–14 Levels

Displays Scottish 5–14 levels for students in the following course report:

▪ Maths Concepts and Skills click Next

4. Pre-Installation Summary click Install

5. Install Complete click Done

Installing Service Pack 1

NOTE: Service Pack 1 can only be installed after the SuccessMaker Enterprise client program has been launched and logged in to for the first time.

Insert the SuccessMaker Enterprise v1.7.2 Service Pack 1 & 2 Installation CD

into the DVD drive

1. Click Start, Run and type X:\SMe_1.7.2_ServicePack1.EXE (where X: is the drive letter for your CD drive) click OK.

2. Introduction click Next

3. Select Install Type - Leave default School / Standalone / Network click Next

4. Select a Install click Next

5. Backup and Validate - Leave both options ticked click Next

6. Pre-Installation Summary click Install

7. Install Complete click Done

Installing Service Pack 2

NOTE: Service Pack 2 can only be installed after Service Pack 1

Insert the SuccessMaker Enterprise v1.7.2 Service Pack 1 & 2 Installation CD

into the DVD drive

1. Click Start, Run and type X:\SMe_v1.7.2_Service Pack2.exe (where X: is the drive letter for your CD drive) click OK.

2. Introduction click Next

3. Select a Install click Next

4. Backup and Validate - Leave both options ticked click Next

5. Pre-Installation Summary click Install

6. Install Complete click Done

7. Remove the CD.

8. Launch SuccessMaker Enterprise 1.7.2 to allow the client workstation files to update. Close once this has completed by pressing the Escape key

Creating a test pupil user

1. Logon to your test workstation as a standard pupil user.

2. Click Start, All Programs, SuccessMaker and then select the RM SuccessMaker Enterprise shortcut. The SuccessMaker Enterprise login screen should now load.

3. Login using

User = sysman

Password = smelearn

4. Click on the Teacher Standard interface

5. From the User menu, select New User. Enter the following details.

First Name = test

Last Name = user

User Name = test

Password = password

Confirm Password = password

User Type = Level 10 - Student

Click OK.

6. Click Assignments on the test user’s details page.

7. Click Assign.

8. Highlight the course at the top of the list, hold down the Shift key then click on the course at the bottom of the list. Click OK.

9. Click Set on each of the individual courses to set the default starting level.

10. Close the user’s properties page by clicking the box in the upper right corner.

11. Logout by clicking the red cross in the top right corner of the screen.

Testing SuccessMaker Enterprise

There are 2 things to test within SuccessMaker Enterprise as a test user. The first is to ensure that the student’s courses load without error, and the second to make sure that the reporting system functions correctly.

1. Logon to your test workstation as your test pupil user.

2. Launch SuccessMaker Enterprise

3. Login using

User = test

Password = password

4. Click on the Laptop on the desk. Select each course in turn and click Go. Answer a few questions then select File and Exit to return to the Choose a Lesson window.

5. When you have run all the courses, click Stop on the Choose a Lesson window.

6. Click on the classroom door to logout of the test pupil account.

7. Login using

User = sysman

Password = smelearn

8. Select the Teacher Standard interface.

9. Expand All Users group in the User Selector.

10. Highlight your Test user, and then select Print for Selected User from the Report menu.

11. Expand Course Reports in the Course Select window.

12. Select one of the courses you ran earlier then click View Options, then click View. An RM branded report will be displayed with details on the questions you answered earlier.

Backing up your SME Database

The SuccessMaker Enterprise 1.7.2 SP1 backup tool allows you to do a live backup of SuccessMaker Enterprise database without stopping the Sybase database service. After the backup has run, you can archive the files to your backup media.

Warning: If you do not backup your database then you may lose your data in the event of a server failure. The SQL database is an open file, so will not be backed up with your usual overnight backups unless you configure the following script file

1. Logon to your Windows Server as an Administrator level user.

2. Open Windows Explorer and navigate to SME\ResultsManager\SuccessMaker\Livebackup (or which fixed drive letter is appropriate for your computer.

3. Right-click LiveBackup.bat and select Edit.

4. Delete the contents of the current file and replace with the following single line of text

dbbackup –c “ENG=SME;uid=backupdba;pwd=sql” c:\SMEBackup –r –y

Save the file and Exit notepad.

5. Create the SMEBackup folder in the location specified in the command line (you can create this where ever is appropriate for your computer, but make sure the script file uses the same location).

6. Double-click on the LiveBackup.bat file to run the script.

7. Navigate to the SMEBackup folder and ensure that you have 2 files – SME.DB & SME.LOG.

NOTE: You should run the LiveBackup script regularly, and then make copy the SME.DB and SME.LOG files to a different computer for safety. Failure to do this may result in loss of your data should your computer fail.

Troubleshooting your installation

SME SQL Service start issues

Could not open/read file:

Incorrect or misspelt path to database. Check parameters on SME service.

Database cannot be started – Permission denied

Incorrect access permissions on the SME structure. The system account requires Full Control to start the service. Confirm this is in set.

JZ006 errors when launching SuccessMaker Enterprise client

Error: JZ006: Caught IOException: .ConnectExceptions: Connection refused: connect

1. Confirm that the SME Service is running on the server

2. The SME service will use UDP port 2638 by default. If that port is currently in use, it will start on the next available port – 2639.

To confirm if UDP port 2639 is currently in use: At the server from a command prompt run NETSTAT –A Look through the resulting information and see if UDP 2638 is listed. This will show as

UDP your_server_name:2638 *:*

To resolve this issue, an additional parameter is added to the SME SQL service parameters

-n SME -qp -ti 0 –x tcpip(ServerPort=2639)

Then update ResultsManager\SuccessMaker\Library\DataAccess.Properties

[Properties]

Driver=com.sybase.jdbc2.jdbc.SybDriver

URL=jdbc:Sybase:Tds::2639

Restart the SME SQL service and relaunch the SuccessMaker Enterprise client

Error: JZ006: Caught IOException: .ConnectExceptions: Connection timed out: connect

Incorrect IP address specified during installation. Check ResultsManager\SuccessMaker\Library\DataAccess.Properties for correct IP address

[Properties]

Driver=com.sybase.jdbc2.jdbc.SybDriver

URL=jdbc:Sybase:Tds::2638

“Unable to load the program. Please check your network connection and try again.”

Check that the mapped drive is connected. SuccessMaker Enterprise runs through a mapped drive, and if the drive is not connected the program will fail to run.

Check the properties of the shortcut on the desktop. The Start In line should point to the ResultsManager folder structure on the mapped drive. The example below is correct when M: is used for the mapped drive. The Target line should not be changed in any circumstance.

[pic]

“Please insert SuccessMaker DVD 1 in to the CD-ROM drive.” when launching courses

This is caused by an issue with the installation of the courseware DVD. SuccessMaker searches connected drive letters until it locates a file called CURRSERV.INI and will then look for the content on that drive letter.

If it either can’t find that file, or once it has found it, can’t locate the content folder called CAI it will fail with this message.

Look in the mapped drive letter you are using for both the CURRSERV.INI and the CAI folder.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download