Etimreck | This WordPress.com site is the cat’s pajamas
E-Banking SystemVersion 1.0System/Subsystem/Software RequirementsDate of Document GenerationRevision A (If Needed)Prepared for:CustomerPrepared by:Developer NameErick Timreck, Christopher Croft, Samuel Underhill, Ryan Avery[Group 3]timrecke@my.easternct.eduTable of Contents1 Introduction.................................................................................................... .................................... 51.1 Purpose of the System................................................................................. .................................... 51.2 Scope of the System.................................................................................... .................................... 61.3 Objective and Success Criteria of the Project ............................................... .................................. 61.4 Definition of Terms and Acronyms ............................................................... .................................. 61.5 References .................................................................................................... .................................. 72 System Context ................................................................................................ .................................. 72.1 System Concept.............................................................................................. ................................. 82.2 Current System................................................................................................ ................................ 92.3 System Design (If this is a component or subsystem of a larger system)....... ........................... ..... 93 Requirements ................................................................................................... ................................. 103.1 Functional Requirements ........................................................................ ....................................... 103.2 Nonfunctional Requirements ................................................................ ......................................... 103.3 Functional (Scenario) Analysis ............................................................. .......................................... 103.3.1 Actors............................................................................................... ........................................... 113.3.2 Use-Case 1 .................................................................................... .............................................. 113.3.3 Use-Case 2 .................................................................................... .............................................. 113.4 Analysis Model ........................................................................................ ...................................... 113.4.1 System Behavior ............................................................................................ ............................. 123.4.2 Object Structure and Behavior .................................................................... ............................... 133.4.3 Data and Data Relations ............................................................................................................. 133.4.3 Data and Data Relations ............................................................................................................. 13APPENDIX A – Previous Versions................................................................ .........................................144.1 Project Plan Introduction (Section 1 of the SPMP)........................................................................ 154.1.2 Project Deliverables (1.2 of the SPMP)....................................................................................... 154.1.3 Evolution of the SPMP (1.3 of the SPMP)................................................................................... 154.1.4 Reference Materials (1.4 of the SPMP)....................................................................................... 154.1.5 Donations and Acronyms (1.5 of the SPMP)............................................................................... 154.2 Project Organization (Section 2 of the SPMP)................................................................................ 164.2.1 Process Model (2.1 of the SPMP)................................................................................................ 174.2.2 Organizational Structure (2.2 of the SPMP)................................................................................ 184.2.3 Organizational Boundaries and Interfaces (2.3 of the SPMP)..................................................... 194.2.4 Project Responsibilities (2.4 of the SPMP)................................................................................... 194.3 Management Objectives and Priorities (3.1 of the SPMP)............................................................. 204.3.2 Assumptions, Dependencies, and Constraints (3.2 of the SPMP)............................................... 204.3.3 Risk Management (3.3 of the SPMP)........................................................................................... 204.3.4 Monitoring and Controlling Mechanisms (3.4 of the SPMP)....................................................... 204.3.5 Staffing Plan (3.5 of the SPMP).................................................................................................... 204.4 Technical Process (Section 4 of the SPMP)..................................................................................... 214.4.1 Methods, Tools, and Techniques (4.1 of the SPMP).................................................................... 214.4.2 Software Documentation (4.2 of the SPMP)................................................................................ 214.4.3 Project Support Functions (4.3 of the SPMP)............................................................................... 214.5.1 Work Packages (5.1 of the SPMP)................................................................................................ 214.5.2 Dependencies (5.2 of the SPMP).................................................................................................. 214.5.3 Resource Requirements (5.3 of the SPMP).................................................................................. 224.5.4 Budget and Resource Allocation (5.4 of the SPMP)..................................................................... 224.5.5 Schedule (5.5 of the SPMP).......................................................................................................... 22List of Figures & TablesFigure 1 - System Context Diagram ................................................................................... 4Revision History3/6 ------ Sections 1-2 complete3/20 ---- Added section 34/3 ----- Added section 4 and on1 INTRODUCTIONThe Engineering Design Support System (EDSS) is a web-based tool designed tosupport small to medium engineering teams for concept exploration through prototyping.This system is designed to boost teamwork and collaboration throughout the developmentprocess and serves as a medium to share ideas and documents that may change. EDSSalso serves as a bulletin board to list the latest changes to requirements and the latestproposals by team members and leaders. The system is usable from any platform via theInternet and allows cross-platform sharing of documents. EDSS is designed to be themedium through which teamwork and collaboration petition and the constant changes in technology and lifestyles have changed the face of banking. Nowadays, banks are seeking alternative ways to provide and differentiate amongst their varied services. Customers, both corporate as well as retail, are no longer willing to queue in banks, or wait on the phone, for the most basic of services. They demand and expect to be able to transact their financial dealings where and when they wish to. With the number of computers increasing every year, the electronic delivery of banking services is becoming the ideal way for banks to meet their clients’ expectations. Online banking or e-banking can be defined as online systems which allow customers to plug into a host of banking services from a personal computer by connecting with the bank’s computer over the telephone wires. Technology continues to make online banking easier for the average consumer. Banks are using a variety of names for online banking services, such as PC banking, home banking, electronic banking or Internet banking. Regardless of the given name, these systems certainly offer specific advantages over the traditional banking methods.E- Banking can be defined as “delivery of bank’s services to a customer at his office or home using Electronic Technology.” The quality, range and price of these electronic services decide a bank’s competitive position in the industry.Technology in banking has been used in four major ways:To handle a greatly expanded customer baseTo reduce substantially the real; cost of handling paymentsTo liberate the banks from the traditional constraints on time and placeTo introduce new products and services.1.1 Purpose of the SystemCompetition: Banks feel the need to offer e-banking services today just to keep up with the competitors and to be able to retain their existing customers. New Markets: The Internet is not only a low cost approach to determine new distribution channels but also to establish a presence in new and upcoming markets. Customer Service: E-banking offers banks an opportunity to improve on their customer service by collecting and managing information pertaining to their customers and their individualistic preferences. For Customers: Anywhere banking- no matter wherever the customer is in the world, online banking is just a web- site away. Balance enquiry, request for services, issuing instructions etc. from anywhere in the world are possible. Consumers can use their computers and a telephone modem to dial in from home or any site where they have access to a computer. Anytime banking-managing funds in real time and most importantly, 24 hours a day, 7 days a week.For Banks: Innovative, secure, addresses competition and presents the bank as technology driven in the banking sector market. Reduces customer visits to the branch and thereby human intervention. This impact tells upon establishment costs of the bank. Inter-branch reconciliation is immediate thereby reducing chances of fraud and misappropriation. On- line banking – an effective medium of promotion of various schemes of the bank, a marketing tool indeed. E-Banking site can act as a revenue earner through promotion activity by consumer corporate. Integrated customer data paves wave for individualized and customized services. E-Banking provides competitive advantage to the bank. And provides unlimited network to the bank and is not limited to the number of branches.For Merchants and Traders: Increase in business because of increased purchasing power of the credit card holders and ease with which purchasing can be done. Less need for merchants or traders to provide credit facility to their customers. Making e-commerce a reality and globalizing the trade. Development of global and loyal clientele base. Assured immediate payment / settlement. Avoid all the cost and risk problems involved in handling cash.1.2 Scope of the SystemElectronic banking is the wave of the future. It provides enormous benefits to consumers in terms of the ease and cost of transactions. But it also poses new challenges for country authorities in regulating and supervising the financial system and in designing and implementing macroeconomic policy. Electronic banking has been around for some time in the form of automatic teller machines and telephone transactions. More recently, it has been transformed by the Internet, a new delivery channel for banking services that benefits both customers and banks. Access is fast, convenient, and available around the clock, whatever the customer's location plus, banks can provide services more efficiently and at substantially lower costs. Electronic banking also makes it easier for customers to compare banks' services and products, can increase competition among banks, and allows banks to penetrate new markets and thus expand their geographical reach. Some even see electronic banking as an opportunity for countries with underdeveloped financial systems to leapfrog developmental stages. Customers in such countries can access services more easily from banks abroad and through wireless communication systems, which are developing more rapidly than traditional “wired” communication network.1.3 Objective and Success Criteria of the ProjectThe problems or disadvantages of E-Banking are Customers may have to face risky transaction and fraud. Failure of power supply cause to break down of system. There will also be a loss of heavy income at times of settlement of higher magnitude. Cost involved in training staff may not be profitable especially in times of attrition. And lastly the development of an attitude of lethargy. The way to fix all these it to make the interface for both the customer and the employee user friendly and very easy to know. But with some problems that’s can be fixed there is always advantages to the system, which are easy opening and closing of accounts. Making the payment of merchandise transactions through Debit and Credit cards. It gives reliefs customers from carrying heavy cash. It enables prompt and speedy operation to clients. And lastly it saves a lot of time to the customer and convenient access for them.1.4 Definition of Terms and AcronymsAction Item– General assignment of a task to a group, subgroup, or individualData Repository – Central collection of dataDocument Management – Versioning control of documents within the systemEDSS – Engineering Design Support SystemEDSS Administrator – Responsible for adding, deleting, and creating Tier 1 projectsand managing Tier 2 usersMarkup - Collection of tags that describe the specifications of an electronicdocument, as for formattingProject Administrator– Responsible for overseeing entire project on Tier 2; Mustsign off on project for it to be closedPrototyping - Creation of a model and the simulation of all aspects of a productScreen – Web page/panelTeam Members – Active participants on team responsible for Tier 3 projectsTier 1 – EDSS homepage with links to projectsTier 2 – Project homepageTier 3 – Team homepage within a project (may have additional subtiers)Viewers – Given access to view pages in the EDSS system without modifying them1.5 ReferencesAmato-McCoy, D. (2005) ‘Creating virtual value’, Bank Systems and Technology,Vol.1,pp 22-27.Burke, R.R. (2002), “Technology and the Customer Interface: What Consumers want in the Physical and Virtual Store”, Journal of the Academy of Marketing Science, Vol.30No.4, pp 411-32.2 SYSTEM CONTEXTE-Banking system is a stand-alone system in which the system focuses on the system’s interface to the external world. What this system would do is have an interface that asks the customer to login to and shows each person accounts and how much they have in each. It also lets you transfer money to different accounts. 2.1 System Concept2.2 Current SystemN/A2.3 System Design (If this is a component or subsystem of a larger system)3 REQUIREMENTS3.1 Functional RequirementsCustomer must have a valid user id and password to login to the systemIf a wrong password is given three times in succession, that account will be locked for a set time depending on how many time they kept entering in the wrong password. When an invalid password is entered a warning is given to the user that his account is going to be locked.After the valid user logs in he is shown the list of accounts he/she has with the bank.On selecting the desired account he is taken to a page which shows the present balance in the particular account number.User can request details of the last ‘n’ number of transactions he has performed. A report can also be taken of this.User can make a funds transfer to another account in the same bank. User is provided with a transaction password which is different from the login password.User can transfer funds from his account to any other account with this bank. If the transaction is successful a notification should appear to the customer, in case it is unsuccessful, a proper message should be given to the customer as to why it failed.User can request for check book/change if address/stop payment of checksUser can view his monthly as well as annual statements. He can take print out of the same.3.2 Nonfunctional Requirements11# Description Range/1000 Those not registered with the system shall not be able to enter it. Only users authorized to 1001 enter the system will have the ability to view the system.1002 The system shall be designed so it can be easily be modified. 1003 The system shall be simple to configure and use. The system will not require its users to adhere to specific organizations of information, and will not be technically difficult to use.1004 If access to the system is invalid more than three times then the user will be locked out for security purposes for a set time depending on how many time the user tried to get access. 3.3 Functional (Scenario) AnalysisCustomer must have a valid user id and password to login to the system—if the customer does not a an account with the bank then they cannot log on.If a wrong password is given three times in succession, that account will be locked for a set time depending on how many time they kept entering in the wrong password. When an invalid password is entered a warning is given to the user that his account is going to be locked. —if the user enters the wrong password three times they will be denied access for 30 minutes, and if the enter in the worn password for another three times after the 30 minutes they will be denied access for 1 hour, each time it doubles.After the valid user logs in he is shown the list of accounts he/she has with the bank. — they will be given their accounts in a list which they can choose from.On selecting the desired account he is taken to a page which shows the present balance in the particular account number. — the user is shown more about their account that they have chosen User can request details of the last ‘n’ number of transactions he has performed. A report can also be taken of this. —the user can see and select any transaction that has happened in the past that regards the account.User can make a funds transfer to another account in the same bank. User is provided with a transaction password which is different from the login password. — the user can transfer money for the system without having to go to the bank to transfer the funds. But you can only make so many transfers online. And will be given a transaction password to log on with to make sure the transaction went through. User can transfer funds from his account to any other account with this bank. If the transaction is successful a notification should appear to the customer, in case it is unsuccessful, a proper message should be given to the customer as to why it failed. — the user will get a notification as to when the transaction has went through or was denied. User can request for check book/change if address/stop payment of checks — the user can order a check book or change their checks. They can also change their address for the billing statements. And they can cancel their account if they wish too. User can view his monthly as well as annual statements. He can take print out of the same. — the user will be able to view all transactions in all accounts on one page and will be prompted if they want to print it or not. 3.3.1 ActorsActor: Account Purpose: This will store each account in the bankRelations: each account will be linked with each person who is the owner of the accountActor: Person Purpose: This will kept track of who and how many people have an account with the bankRelations: Each person will be given their own account and will only be able to access that account. Each person can have multiply accounts3.3.2 Use-Case 1Use-Case Name: UserParticipating Actors: Person, accountEntry Condition: user to person is one to one, user to account is one to many3.3.3 Use-Case 2Use-Case Name: BankParticipating Actors: Person, accountEntry Condition: bank to person is many to many, Bank to account is many to many3.4 Analysis ModelWhat this system does is holds a database of a person and of an account. Where each person has multiply accounts that they can access over the interface. And will only let them access the accounts that are matched with their ID. And the inter face will let them do all different kinds of things with their account form just checking their balance on their account to transferring money from account to account. Each database interacts with each other in the each person and have multiply accounts, but each account must have at least one person. 3.4.1 System BehaviorThe system behavior is that it the user log on at their terminal, it bring them through the internet to the systems control in which it lets them access their database records that are linked to their account. And form the bank they are able to access every ones records in the database using the banks admin terminal. 3.4.2 Object Structure and BehaviorResearch design for this study is descriptive. This research is undertaken with an idea to see customer satisfaction regarding e-banking. The main aim of such a design is to ensure that the required data collected objectively, accurately and economically.3.4.3 Data and Data RelationsAPPENDIX A – Previous VersionsFor Customers: Anywhere banking- no matter wherever the customer is in the world, online banking is just a web- site away. Balance enquiry, request for services, issuing instructions etc. from anywhere in the world are possible. Consumers can use their computers and a telephone modem to dial in from home or any site where they have access to a computer. Anytime banking-managing funds in real time and most importantly, 24 hours a day, 7 days a week.For Banks: Innovative, secure, addresses competition and presents the bank as technology driven in the banking sector market. Reduces customer visits to the branch and thereby human intervention. This impact tells upon establishment costs of the bank. Inter-branch reconciliation is immediate thereby reducing chances of fraud and misappropriation. On- line banking – an effective medium of promotion of various schemes of the bank, a marketing tool indeed. E-Banking site can act as a revenue earner through promotion activity by consumer corporate. Integrated customer data paves wave for individualized and customized services. E-Banking provides competitive advantage to the bank. And provides unlimited network to the bank and is not limited to the number of branches.For Merchants and Traders: Increase in business because of increased purchasing power of the credit card holders and ease with which purchasing can be done. Less need for merchants or traders to provide credit facility to their customers. Making e-commerce a reality and globalizing the trade. Development of global and loyal clientele base. Assured immediate payment / settlement. Avoid all the cost and risk problems involved in handling cash.Customer must have a valid user id and password to login to the systemIf a wrong password is given three times in succession, that account will be locked for a set time depending on how many time they kept entering in the wrong password. When an invalid password is entered a warning is given to the user that his account is going to be locked.After the valid user logs in he is shown the list of accounts he/she has with the bank.On selecting the desired account he is taken to a page which shows the present balance in the particular account number.User can request details of the last ‘n’ number of transactions he has performed. A report can also be taken of this.User can make a funds transfer to another account in the same bank. User is provided with a transaction password which is different from the login password.User can transfer funds from his account to any other account with this bank. If the transaction is successful a notification should appear to the customer, in case it is unsuccessful, a proper message should be given to the customer as to why it failed.User can request for check book/change if address/stop payment of checksUser can view his monthly as well as annual statements. He can take print out of the same.Project Plan4.1 Introduction (Section 1 of the SPMP)4.1.1 Project Overview (1.1 of the SPMP)This project is an electronic banking system. This will be in the form of an application that a user could access. The application will need to be developed in JAVA, with a proper UI and functionality. The requirements of the product can be located in tin the <requirements document>4.1.2 Project Deliverables (1.2 of the SPMP)1. Requirements document 3/13/20132. Project Plan, 3/13/20133. Design, 4/1/20134. Logs and journals, (throughout project)5. Progress reports, (throughout project)6. Final documents, 4/24/20134.1.3 Evolution of the SPMP (1.3 of the SPMP)Not applicable yet to this particular project as it is the first of its kind and has yet to evolve at this time.4.1.4 Reference Materials (1.4 of the SPMP)4.1.5 Donations and Acronyms (1.5 of the SPMP)Action Item– General Assignment of a task to a group, subgroup, or individualData Repository – Central collection of dataDocument Management – Versioning control of documents within the systemEDSS – Engineering Design Support SystemEDSS Administrator – Responsible for adding, deleting, and creating Tier 1 projectsand managing Tier 2 usersMarkup - Collection of tags that describe the specifications of an electronicdocument, as for formattingProject Administrator– Responsible for overseeing entire project on Tier 2; Mustsign off on project for it to be closedPrototyping - Creation of a model and the simulation of all aspects of a productScreen – Web page/panelTeam Members – Active participants on team responsible for Tier 3 projectsTier 1 – EDSS homepage with links to projectsTier 2 – Project homepageTier 3 – Team homepage within a project (may have additional sub tiers)Viewers – Given access to view pages in the EDSS system without modifying them4.2 Project Organization (Section 2 of the SPMP)4.2.1 Process Model (2.1 of the SPMP)4.2.2 Organizational Structure (2.2 of the SPMP)4.2.3 Organizational Boundaries and Interfaces (2.3 of the SPMP)The parent organization would be the company that we work for. The customer organization would be the bank that requires the system. The bank would tell us what they need and want in the software. They would also have the final say in the product and all of the functions in it. They would not have much input during the coding phase but their requirements would dictate it. 4.2.4 Project Responsibilities (2.4 of the SPMP)4.3 Management Objectives and Priorities (3.1 of the SPMP)Everyone will be working on everything to keep collaboration high. It will keep everyone in the loop for the entirety of the project. It will also be easy to see who’s doing how much of what. Reports will be given at the end of all development stages. Risks would be the constant barrage of snow days. They have already hindered us at a few key points. Keeping in contact with all group members might be difficult and should have an eye kept on it because we all have different schedules. So far we have had difficulty meeting up sue to different schedules. This risk must be dealt with. This system will be designed from scratch.4.3.2 Assumptions, Dependencies, and Constraints (3.2 of the SPMP)During the project we assume the customer has an action to perform. We assume that they have and account with the bank already if they are trying to withdraw money or deposit money. Depending on if they have money, how much money they can withdraw. The customer must put in the proper pin number. The type of accounts the user has may change what they can and can’t do. (For instance interest on a savings account vs no interest on a checking account.) This will have constraints to access the system. The customer must have an account to do any action.4.3.3 Risk Management (3.3 of the SPMP)One big risk that we’ve taken precautions against is the "this person didn't do enough", we’ve split it up so everyone has a part in everything. An issue that’s already popped up is the snow issue and school closing down. We’ve already missed a couple of meetings and finding times to make it up is difficult. Some of us don’t come to the school every day and some of us have class when the others don’t, Others have to leave here and immediately go to work. We have to keep in contact with each other and figure out each other’s schedules and maybe find a better meeting time.4.3.4 Monitoring and Controlling Mechanisms (3.4 of the SPMP)We will file reports at the end of all phases. There will be constant contact between the 4 of us over who’s doing what and how it’s getting done. Monitoring will have to be done through periodic progress checks by the group leader Erick. 4.3.5 Staffing Plan (3.5 of the SPMP)So far we have everyone doing a bit of everything so most of the categories are split. We all have some level of programming knowledge that will come in at the code phase. The only thing that might be trainable is the concept of how a bank works. There is no time for training and we can’t phase out any members. Everyone is needed at all points of the project. As for skill level that we all need to have, we must be able to work with object oriented languages at an object level. 4.4 Technical Process (Section 4 of the SPMP)4.4.1 Methods, Tools, and Techniques (4.1 of the SPMP)We will be programming our system out in Java. This project will be very customer driven. There would be lots of meeting between the coders and the customer (in this case fictitious), to find out the things that they really require. 4.4.2 Software Documentation (4.2 of the SPMP)This subsection of the SPMP shall contain either directly or by reference, the documentation plan for the software project. The documentation plan shall specify the documentation requirements, and the milestones, baselines, reviews, and sign-offs for software documentation. The documentation plan may also contain a style guide, naming conventions and documentation formats. The documentation plan shall provide a summary of the schedule and resource requirements for the documentation effort. ANSI/IEEE Std 829-1983 [4] provides a standard for software test documentation.4.4.3 Project Support Functions (4.3 of the SPMP)This subsection of the SPMP shall contain, either directly or by reference, plans for the supporting functions for the software project. These functions may include, but are not limited to, configuration management 3; software quality assurance 2 and 5; and verification and validation 6. Plans for project support functions shall be developed to a level of detail consistent with the other sections of the SPMP. In particular, the responsibilities, resource requirements, schedules, and budgets for each supporting function shall be specified. The nature and type of support functions required will vary from project to project; however, the absence of a software quality assurance, configuration management, or verification and validation plan shall be explicitly justified in project plans that do not include them.4.5.1 Work Packages (5.1 of the SPMP)This subsection of the SPMP shall specify the work packages for the activities and tasks that must be completed in order to satisfy the project agreement. Each work package shall be uniquely identified; identification may be based on a numbering scheme and descriptive titles. A diagram depicting the breakdown of activities into sub activities and tasks (a work breakdown structure) may be used to depict hierarchical relationships among work packages.4.5.2 Dependencies (5.2 of the SPMP)This subsection of the SPMP shall specify the ordering relations among work packages to account for interdependencies among them and dependencies on external events. Techniques such as dependency lists, activity networks, and the critical path method may be used to depict dependencies among work packages.4.5.3 Resource Requirements (5.3 of the SPMP)We will require at least 4 computers to create this piece of software. The personnel will have general knowledge about the topic. We will require a computer lab for most of the project. There might be some support software to verify and encrypt pin numbers (fictitious). Overall the project should take about 40 man-hours to complete, split into even parts that are 10 man-hours for each worker. As for hardware it won’t be too resource drawing so any plain old computer would probably run it. There would have to be some sort of support software for a scanning feature for credit cards. (??????) 4.5.4 Budget and Resource Allocation (5.4 of the SPMP)We will have to evenly distribute our resources throughout the project. We have no budget since this is just a programming assignment. We also shouldn’t have any expenditure since we are just coding a fake banking system.4.5.5 Schedule (5.5 of the SPMP) ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- va maryland health care system
- united states district court for the district of kansas
- world health organization
- etimreck this site is the cat s pajamas
- section 1 american legion
- title scope definitions united states district court
- thank you for having a september catalog show
- victim outreach packet wisconsin dcf
Related searches
- when is the autumnal equinox this year
- what is the president s job
- who is the world s strongest man
- what is the earth s period of revolution
- what is the president s job description
- what is the largest domestic cat breed
- my cat s belly is hard
- where is the camera on this computer
- what is the moon phase this month
- what is the moon cycle this month
- when is the new moon this month
- what is the author s purpose