Testing Connectivity for WebEx - LearnQuest



How to Test and Connect to WebEx Remote Access

This test must be performed from the location where the training will take place.

Step 1) Open a web browser

Step 2) Browse to

Step 3) Enter the Username:  LQDemo

Step 4) Enter the Password:  Learn4life       (this may change from time to time)

[pic]

Step 5) You will see the list of folders and demo workstations in the main window.

Step 6) Expand the LQ_DEMO folder.

Step 7) Select an available workstation by clicking on the “CONNECT” button to the right

[pic]

Step 8) You may be prompted to download a Java or Active X control.  Allow installation (this process only takes a few moments).

Step 9) An Access Code widow will appear.

Step 10) Enter the Access Code:  Labmachine1

[pic]

Step 11) You will now be connected to the remote workstation.

Step 12) Click on the Down arrow in the lower right to and select “VIEW” from the popup menu. This will allow you to modify screen resolution settings as needed.

Step 13) To exit the remote workstation clink on the X in the upper right or select END REMOTE ACCESS SESSION” from the popup menu.

Step 14) If this process was successful then the client can use this product. Remember, this test must be performed from the location where the training will take place.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download