TREATING IRONS, UNIONS, SWIVELS & CIRCULATING HEADS …

Treating Irons, Unions, Swivels & Circulating Heads

TREATING IRONS, UNIONS, SWIVELS & CIRCULATING HEADS INDEX

SR. INDEX

NO.

1

Cementing And Circulating Hoses

PAGE 89

2

Cementing & Circulating Hoses

91

3

Swivel Joints

94

4

Short Sweep Swivel Joint (Basic Dimensions) Style-20

95

5

Short Sweep Swivel Joint (Basic Dimensions) Style-30

96

6

Short Sweep Swivel Joint (Basic Dimensions) Style-40

97

7

Short Sweep Swivel Joint (Basic Dimensions) Style-50

98

8

Short Sweep Swivel Joint (Basic Dimensions) Style-60

99

9

Short Sweep Swivel Joint (Basic Dimensions) Style-70

100

10 Short Sweep Swivel Joint (Basic Dimensions) Style-80

101

11 Short Sweep Swivel Joint (Basic Dimensions) Style-10

102

12 Long Sweep Swivel Joint (Basic Dimensions) Style-20

103

13 Long Sweep Swivel Joint (Basic Dimensions) Style-30

104

14 Long Sweep Swivel Joint (Basic Dimensions) Style-40

105

15 Long Sweep Swivel Joint (Basic Dimensions) Style-50

106

16 Long Sweep Swivel Joint (Basic Dimensions) Style-60

107

17 Long Sweep Swivel Joint (Basic Dimensions) Style-70

108

18 Long Sweep Swivel Joint (Basic Dimensions) Style-80

109

19 Long Sweep Swivel Joint (Basic Dimensions) Style-10

110

20 Hammer Unions

111

21 Air - Unions

118

22 Treating Irons, Union Connections, Bull Plugs, Cross Over Adaptors & Swages 119

23 Integral / Fabricated Union Connections

120

24 Changeover / Crossover Adaptors

121

25 Circulating Head

122

26 Mud Gun

123

27 Integral / Welded Union End Fit tings

124

88

Treating Irons, Unions, Swivels & Circulating Heads

CEMENTING AND CIRCULATING HOSES

General Description

Introduction

PARVEEN'S Cementing & Circulating Hoses are manufactured in various sizes (from 1" to 4") and in various configurations to meet virtually all needs of Oil Industry. These can handle a wide variety of fluids at cold working pressure up to 20,000 PSI. These hoses are made in steel to meet ASTM/AISI standards, are rugged, fold up easily and quickly for transportation. These .are specially heat treated to get the desired hardness to suit various applications. Even sizes beyond 4" can be supplied to meet customer requirement.

Ser vice Applications

These hoses are recommended for ser vice in Low Pressure Lines, High & Ex tra High pressure Lines, Discharge Lines, Water Lines, Well Testing Lines, Cementing & Circulating Lines, Temporary Flow Lines and Ex tra Pressure Abrasive Applications.

Swivel Joint Connections

PARVEEN'S hoses features PARVEEN'S Swivel Joints which provide flexibility, ma ximize flow characteristics and absorb shock vibrations.

Wing Unions

PARVEEN'S wing unions end connections provided in the cementing hoses ensure pressure tight and fast make up and quick break-out without threading, welding or special connections.

Sour Gas Ser vice

PARVEEN'S cementing hoses are available in various sizes and configurations for sour gas service as per NACE standards MR-01- 75 and API standard RP-14E up to cold working pressure of 15000 PSI.

Method of Construction

These hoses can be manufactured either threaded or integral or welded constructions or with NPS end connections.

Standard Lengths of Hoses

Following standard lengths are available. These lengths are fully ex tended lengths of the unfolded hoses:

Threaded Hose - 12 feet

NPS Hose

- 12 feet

Welded Hose - 12 feet

Integral Hose - 12 feet

Other lengths can also be provided on request. PARVEEN'S hoses are also available in half section configuration. In this case, stated length will be half of the length of comparable full length section. The loop can be divided into various sections depending upon the number of unions in the loop. The loop is generally in 4 & 2 sections.

Swivel Joint St yles

PARVEEN'S Swivel Joints can be manufactured equivalent to style 10, 20, 30, 40, 50,' 60, 70 & 80. Normally the most used style in various applications in style 50 and style 10 but PARVEEN'S can cater for any style to meet customer requirements.

Pressure Ratings

Hoses with following ratings are available as given in table below.

Inter changeabilit y

PARVEEN'S hammer unions or end connections are interchangeable with the unions and connections of all the major manufacturers of these products in the world.

89

Treating Irons, Unions, Swivels & Circulating Heads

CEMENTING AND CIRCULATING HOSES

CEMENTING &

SWIVEL JOINTS

CIRCULATIG HOSES

COLOUR CODE

OLIVE

GREEN

SHORT SWEEP SWIVEL JOINT (1", 1 1 /2",2", 2 1 /2",3",4")

YELLOW/ SILVER BLACK OLIVE GREEN BROWN

LONG SWEEP SWIVEL JOINT (1", 1 1 /2",2", 2 1 /2",3",4")

OLIVE GREEN BLACK

OLIVE GREEN

RED LIGHT BLUE

SERVICE

CONSTRUCTIONS DETAILS

THREADED NPS INTEGRAL WELDED

SOUR

P

P

P

P

NOMINAL SIZE (INCHES) 1" 1 1 /2" 2" 2 1 /2" 3" PP PP P

STD

P

P

P

P

PP PP P

STD

P

SOUR

P

P

P

P

P

P

PP PP P

P

PP PP P

STD

P

P

P

P

PP PP P

SOUR

P

P

P

P

PP PP P

STD

P

P

P

P

PP PP P

SOUR

_

_

P

P

PP PP P

STD

_

_

P

STD

_

_

P

P

PP PP P

_

__

P_

P

CWP

4" (PSI)

P 100 PSI TO

6000PSI P 100 PSI

TO 6000PSI P 10000 PSI

P 10000 PSI

UNION FIGURE FIG-602

FIG-602

FIG-1002 FIG-1502

P 6000 PSI FIG-602

TO

OR

7500 PSI FIG-1002

P 6000 PSI FIG-602 7500 PSI FIG-1002

10000 PSI FIG-1502

P 10000 PSI FIG-1002 OR

FIG-1502

P 15000 PSI FIG-2202 OR

FIG-1502

P 15000 PSI FIG-1502

_ 20000 PSI FIG-2002

90

Treating Irons, Unions, Swivels & Circulating Heads

CEMENTING & CIRCULATING HOSES

Par veen's t ypical steel Cementing & Circulating Hoses are shown below with its model numbers. These hoses have either Threaded ends or NPS or Integral or Welded ends.

Model Number indicates:

i. Type of Sweep i.e. Long Sweep or Short Sweep (i.e. LS or SS)

ii. Style of Swivel Joints used (i.e. Style 10, Style 50 or Style 10 & Style 50 both & numbers of swivel joints i.e.1 or 2)

iii. Numbers of Unions used (i.e. 1, 2 or 4 etc.

iv. Type of end connection i.e. Threaded (T), NPS (N), Integral (I) or Welded (W)

Example: Model Number PLSCCH-50-2-4U-1 indicates.

i. PLSCCH : Parveen Long Sweep Cementing & Circulating Hose.

ii. 50-2 iii. 4U

: Style 50 Swivel Joint, 2 Numbers. : 4 Numbers of Union

iv. I

: Integral Union End Connection

I. THREADED ENDS USING API LINE PIPE THREADS

UNION (THREADED)

1 NO.

S. JOINT (THREADED) STYLE-50 (2 NOS.)

MODEL NUMBER. PSSCCH-50-2-1U-T

1 NO. STYLE- 10 (2 NOS.) PSSCCH-10-2-1U-T

2 NOS. STYLE-50 (2 NOS.) PSSCCH-50-2-2U-T

2 NOS.

4 NOS.

4 NOS.

STYLE-10 (2 NOS.) STYLE-50 (2 NOS.) STYLE-10 (2 NOS.)

PSSCCH-10-2-2U-T PSSCCH-50-2-4U-T PSSCCH-10-2-4U-T

CONFIGURATION OF THREADED END MODELS

MODEL NUMBER: PSSCCH-50-2-1U-T

MODEL NUMBER: PSSCCH-10-2-1U-T

MODEL NUMBER: PSSCCH-50-2-2U-T

MODEL NUMBER: PSSCCH-10-2-2U-T

MODEL NUMBER: PSSCCH-50-2-4U-T

MODEL NUMBER: PSSCCH-10-2-4U-T

91

Treating Irons, Unions, Swivels & Circulating Heads

CEMENTING & CIRCULATING HOSES

2. NPS ENDS

UNION SWIVEL JOINT UNION END

MODEL NUMBER.

4 NOS. STYLE-50 (2 NOS.) PLSCCH-50-2-4U-N

4 NOS. STYLE- 10 (2 NOS.) PLSCCH-10-2-4U-N

4 NOS. STYLE-50 (2 NOS.) PSSCH-50-2-4U-N

4 NOS. STYLE- 10 (2 NOS.) PSSCCH-10-2-4U-N

CONFIGURATION OF NPS END MODELS

MODEL NUMBER: PLSCCH-50-2-4U-N

MODEL NUMBER: PLSSCCH-10-2-4U-N

MODEL NUMBER: PSSCCH-50-2-4U-N

MODEL NUMBER: PSSCCH-10-2-4U-N

3. WELDED ENDS

UNION SWIVEL JOINT UNION END

MODEL NUMBER.

4 NOS. STYLE-50 (2 NOS.) PLSCCH-50-2-4U-W

4 NOS. STYLE- 10 (2 NOS.) PLSCCH-10-2-4U-W

4 NOS. STYLE-50 (2 NOS.) PSSCCH-50-2-4U-W

CONFIGURATION OF WELDED END MODELS

4 NOS. STYLE- 10 (2 NOS.) PSSCCH-10-2-4U-W

MODEL NUMBER: PLSCCH-50-2-4U-W

MODEL NUMBER: PLSSCCH-10-2-4U-W

MODEL NUMBER: PSSCCH-50-2-4U-W

MODEL NUMBER: PSSCCH-10-2-4U-W

92

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download