Quick Install Guide Note for Windows Vista® and Windows ...

[Pages:1]ENGLISH

Quick Install Guide

USB 3.0 Gigabit Ethernet Adapter

Thank you for purchasing the DUB-1312 USB 3.0 Gigabit Ethernet Adapter. Follow the easy steps in this guide to properly set up your adapter. First you should verify that all the package contents below are available.

Package Contents

DUB-1312 USB 3.0 Gigabit Ethernet Adapter

DUB-1312 Drivers and User Manual on CD-ROM Quick Installation Guide

If any of the above items are missing, please contact your reseller.

Minimum Requirements

A Computer with: ? Microsoft Windows? 8/7/Vista?/XP (Service Pack 3), Linux (kernel 2.6.14

or above), or Mac OS? X 10.6 to 10.8 ? Pentium 2.0 GHz or higher with a minimum of 32 MB RAM ? Available USB port (USB 3.0 required for Gigabit speeds) ? CD-ROM Drive

DUB-1312

Hardware Overview

1

2

ID COMPONENT

DESCRIPTION

1

Ethernet Port Plug an Ethernet cable from a switch or router into this port.

Plug this connector into a USB port on your PC. 2 USB Connector (Use USB 3.0 for best performance.)

Driver Installation - Windows? 8/7/ Vista?/XP

The driver installation instructions that follow are for Windows? 8, 7, Vista?, and XP. This process may vary slightly for older Windows? operating systems. For information about how to install the DUB-1312 on Mac or Linux systems, refer to the DUB-1312 user manual on the Installation CD.

Step 1 Insert the Installation CD into your CD drive. The DUB-1312 menu screen will appear. Click Install to begin the DUB-1312 driver installation. The InstallShield Wizard window will pop up and run automatically for Windows? 8 and 7.

Note: If the user interface does not start up automatically, go to your PC's CD drive and open Autorun.exe manually.

Note for Windows Vista? and Windows? XP Users: This driver does not have WHQL digitally signed certification for Vista and XP. If you see a warning message regarding WHQL status, you must accept unsigned driver installation in order to continue. Windows Vista and XP x64 users should disable WHQL checking in order to proceed with driver installation.

Step 2 When the driver installation is complete, plug the DUB-1312's USB cable into an available USB port on your PC. Within a few seconds, Windows will detect a new device and install the device driver software. Note for Windows? 8 and 7 Users: Installation will be automatic. Skip to Step 4.

Step 3 (Applies only to Windows? XP) The Found New Hardware Wizard window will open. Select Yes, this time only and click Next to continue. On the next screen, click Install the software automatically, and click Next to continue. The driver software installation will run automatically. Step 4 Attach an Ethernet cable to the Ethernet port on the DUB-1312. Step 5 Attach the other end of the Ethernet cable to your network switch or router. Note: If your switch or router has ports with gigabit capability, make sure you use one of these ports to achieve maximum data transfer speeds.

Installation Complete

After installation, the Connection Speed LED will be solid orange if the device is connected to a 1 Gbps network. It will remain off if the device is connected to a 10/100 Mbps network. The Link/ACT LED will be solid green when there is a good physical connection between the DUB-1312 and the network. It will flash green when data is being transmitted or received.

If both LEDs are unlit, there may be a problem with the physical connection. Check the cables between your DUB-1312, your computer, and your switch or router. Verify that your network hub, switch, or router is powered on.

1

2

Number Indication

1

Connection Speed

2

Link/ACT

Status Solid Off Solid Flashing

Description 1 Gbps connection present 10/100 Mbps connection present An active connection is present Data is being transmitted/received

Technical Support

Having trouble installing your new product? D-Link's website contains the latest user documentation and sof dates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone.

United States

Canada

Telephone: (877) 453-5465

Telephone: (800) 361-5265

Internet:

Internet:

Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Copyright ?2018 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Maximum transfer rate based on USB 3.0 specifications. Actual data throughput will vary. Using a USB 1.1 or 2.0 port will affect device performance. The total power consumption of the connected USB devices must be less than 2.4A. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit (US) or dlink.ca (Canada) for more details.

Version 1.10(US)_94X128 | November 29, 2018 660-DL1-NG372B2A000

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download