260/360/560 Insulclad Entrances - Construction

FEBRUARY, 2011 EC 97911-27

260/360/560 INSULCLAD? ENTRANCES

1

FEATURES

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

Features

? 260 Insulclad? has 2-11/16" vertical stile, 2-13/16" top and 4-7/16" bottom rail ? 360 Insulclad? has 4-1/16" vertical stile, 4-1/16" top and 7-1/16" bottom rail ? 560 Insulclad? has 5-9/16" vertical stile, 5-9/16" top and 7-1/16" bottom rail ? Door is 2-1/4" deep ? Dual moment welded corner construction ? Door incorporates an extruded PVC thermal break ? Single acting ? Offset pivots, butt hinges or continuous geared hinge ? Surface mounted or concealed closers ? MS locks or Exit Device hardware ? Architects Classic push/pulls ? 1" infill ? Adjustable astragal utilizing pile weathering with polymeric fin at meeting stiles ? Sealair? bulb polymeric weatherstripping in door frames ? Permanodic? anodized finishes in seven choices ? Painted finishes in standard and custom choices

Optional Features

? Numerous push/pull finishes ? Variety of bottom rail and cross rails ? Two-color finish capability

Product Applications ? 260 Insulclad? ? engineered for thermal efficiency in moderate traffic applications such as

offices, stores and apartment buildings ? 360 Insulclad? ? provides thermal efficiency and extra strength for schools, institutions

and other high traffic applications. ? 560 Insulclad? ? designed for thermal efficiency with a monumental visual statement for

banks, libraries or buildings that experience heavy traffic conditions

For specific product applications, Consult your Kawneer representative.



Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. ? Kawneer Company, Inc., 2011



Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

? Kawneer Company, Inc., 2011

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

FEBRUARY, 2011 EC 97911-27

BLANK PAGE

260/360/560 INSULCLAD? ENTRANCES

2

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

FEBRUARY, 2011 EC 97911-27

260/360/560 INSULCLAD? ENTRANCES

3

INDEX

PICTORIAL VIEW................................................................................ 5 260 ENTRANCE DETAILS.................................................................. 6 360 ENTRANCE DETAILS.................................................................. 7 560 ENTRANCE DETAILS.................................................................. 8 OPTIONAL DOOR DETAILS............................................................... 9 HARDWARE STANDARDS..........................................................10, 11 THERMAL PERFORMANCE TEST DATA........................................ 12 WINDLOAD & DEADLOAD CHARTS............................................... 13 THERMAL CHARTS..................................................................... 14-23

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. ? Kawneer Company, Inc., 2011

LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR.

Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted.

The following metric (SI) units are found in these details: m ? meter cm ? centimeter

mm ? millimeter s ? second

Pa ? pascal MPa ? megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement.





Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

? Kawneer Company, Inc., 2011

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

FEBRUARY, 2011 EC 97911-27

BLANK PAGE

260/360/560 INSULCLAD? ENTRANCES

4



INSULCLAD? 260 DOOR

THRESHOLD CLIP

TOP PIVOT DOOR PORTION

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

? Kawneer Company, Inc., 2011

THRESHOLD

BOTTOM PIVOT FRAME PORTION

TOP PIVOT FRAME PORTION

SEALAIR? WEATHERING

TRANSOM BAR LOCK JAMB

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

SHEAR BLOCK

TRANSOM HEAD

SHEAR BLOCK

PIVOT JAMB

PICTORIAL VIEW

FEBRUARY, 2011 EC 97911-27

5

260/360/560 INSULCLAD? ENTRANCES

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download