TG TD/TF/TG Series

[Pages:2]Installation Guide

Temperature

TG

TF TD

TM

TD/TF/TG Series

Duct Mounted Temperature Sensors Product Overview

TD, TF, and TG temperature sensors monitor the temperature of the air inside a duct. The probe is available in multiple lengths to suit multiple applications. All models have standard resistive outputs compatible with building control systems, and all models are warranted for a period of five years.

NOTICE

? This product is not intended for life or safety applications. ? Do not install this product in hazardous or classified locations. ? Read and understand the instructions before installing

this product. ? Turn off all power supplying equipment before working on it. ? The installer is responsible for conformance to all applicable codes.

No responsibility is assumed by Veris Industries for any consequences arising out of the use of this material.

Product Identification

Enclosure T

Probe Length Sensor Type

Output R?

Cal Certificate

D = Duct

B = 4" (102 mm)

F = Duct w/

C = 6" (152 mm)

mounting box D = 8" (203 mm)

G = Duct w/ water E = 12"(305 mm)

resistant housing F = 18"(457 mm)

G = 24" 610 mm)

K = 36" (914 mm)

B = 100R platinum, RTD = Resistive C = 1k platinum, RTD D = 10k T2, Thermistor E = 2.2k, Thermistor F = 3k, Thermistor G = 10k CPC, Thermistor H = 10k T3, Thermistor I = 1k Balco (Nickel-iron) RTD J = 10k Dale, Thermistor K = 10k w/11k shunt, Thermistor M = 20k NTC, Thermistor N = 1800 ohm, Thermistor R = 10k US, Thermistor S = 10k 3A221, Thermistor T = 100k, Thermistor U = 20k "D", Thermistor W = 10k T2 high accuracy, Thermistor Y = 10k T3 high accuracy, Thermistor Z = 10k E1, Thermistor CC = 15k, Thermistor

0 = None 1 = 1 point Cal validation 2 = 2 point Cal validation

Specifications

Wiring 22 AWG; 2-wire RTD/Thermistor Housing Stainless Steel

COMPLIANCE INFORMATION Approvals CE

Z205467-0D

Page 1 of 2

?2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris `V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

Other companies' trademarks are hereby acknowledged to belong to their respective owners.

08132

Installation Guide Temperature TD/TF/TG Series

Dimensions

Installation

TM

1.5" (38 mm)

TD Model

1.1" 2" (28 mm) (51 mm)

1.1" (28 mm)

L

TF Model

2.3" (59 mm)

0.25"Dia. (6 mm)

4.3" (109 mm)

0.25"Dia. (6 mm)

L

2.9" (74 mm)

4.6" (117 mm)

0.7" (18 mm)

Foam Gasket 2.5" x 2.5" (62 mm x 62 mm)

2.0" (51 mm)

TG Model

0.25" Dia. (6 mm)

0.25" Dia. (6 mm)

1. Drill a 3/8" diameter hole into a duct for the sensor probe.

2. Insert the probe into the duct.

3. Secure the junction box housing (TF/TG) or the mounting flange (TD) to the outer surface of the duct using the self-tapping screws provided.

4. Wire as shown.

Thermistor RTD

Orange Orange

Z205467-0D

Page 2 of 2

?2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris `V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

Other companies' trademarks are hereby acknowledged to belong to their respective owners.

08132

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download